User's Manual

Property Definition
Encrypted Displays whether the virtual disk is encrypted. The possible values are
Yes and No.
Hot Spare Policy Violated Displays whether the Hot Spare Protection Policy has been violated.
NOTE: This property is displayed only if you set any Hot Spare
Protection Policy. For more information, see Setting Hot Spare
Protection Policy.
T10 Protection Information
Status
Displays the data integrity status of the virtual disk. The possible
options are Enabled and Disabled.
Layout Displays the RAID level.
Size Displays the total capacity of the virtual disk.
The algorithm for calculating the virtual disk size rounds a value of
0.005 or less, down to 0.00 and a value between 0.006 and 0.009,
up to 0.01. For example, a virtual disk size of 819.725 is rounded
down to 819.72. A virtual disk size of 819.726 is rounded up to 819.73.
Associated Fluid Cache State
This property displays the associated Fluid Cache state of the virtual
disk. The possible values are
• Active — The Fluid Cache disk is active.
• Failed — The Fluid Cache has encountered a failure of one or
more components and is no longer functioning.
• No — The Fluid Cache is not enabled.
• Disabling — In this transient state, the cache removal from the
virtual disk is in process.
Device Name Displays the operating system device name for this object.
Bus Protocol Displays the technology that the physical disks included in the virtual
disk are using. Possible values are:
• SCSI
• SAS
• SATA
Media Displays the media type of the physical disks present in the virtual
disk. The possible values are:
• HDD
• SSD
• Unknown — Storage Management is unable to determine the
media type of the physical disk.
NOTE: You cannot have a mix of HDD and SSD media on a
virtual disk. Also, you cannot have a mix of SAS and SATA drives
on the virtual disk.
Read Policy Displays the read policy that the controller is using for the selected
virtual disk. See RAID Controller Read, Write, Cache, and Disk Cache
Policy.
155