Server Administrator Version 8.0.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents 1 Introduction......................................................................................................... 17 What’s New in this Release..................................................................................................................17 Alert Message Change History............................................................................................................ 17 Messages Not Described in This Guide.............................................................
Event ID — 1053............................................................................................................................ 33 Event ID — 1054............................................................................................................................ 33 Event ID — 1055............................................................................................................................ 34 Cooling Device Messages............................................................
Event ID — 1400............................................................................................................................ 47 Event ID — 1401............................................................................................................................ 48 Event ID — 1402............................................................................................................................48 Event ID — 1403.....................................................................
Event ID — 2005............................................................................................................................58 3 Storage Management Message Reference.................................................... 59 Alert Monitoring and Logging.............................................................................................................59 Alert Message Format with Substitution Variables.............................................................................
Event ID — 2092............................................................................................................................76 Event ID — 2094............................................................................................................................76 Event ID — 2095............................................................................................................................ 77 Event ID — 2098......................................................................
Event ID — 2141............................................................................................................................ 94 Event ID — 2142............................................................................................................................ 95 Event ID — 2143............................................................................................................................ 95 Event ID — 2144....................................................................
Event ID — 2183........................................................................................................................... 111 Event ID — 2184........................................................................................................................... 111 Event ID — 2185........................................................................................................................... 111 Event ID — 2186....................................................................
Event ID — 2227.......................................................................................................................... 126 Event ID — 2228.......................................................................................................................... 127 Event ID — 2229.......................................................................................................................... 127 Event ID — 2230.......................................................................
Event ID — 2270.......................................................................................................................... 142 Event ID — 2271...........................................................................................................................142 Event ID — 2272.......................................................................................................................... 142 Event ID — 2273.......................................................................
Event ID — 2314.......................................................................................................................... 158 Event Id — 2315........................................................................................................................... 159 Event ID — 2316.......................................................................................................................... 159 Event ID — 2318......................................................................
Event ID — 2358.......................................................................................................................... 175 Event ID — 2359.......................................................................................................................... 176 Event ID — 2360.......................................................................................................................... 176 Event ID — 2361.......................................................................
Event ID — 2403.......................................................................................................................... 191 Event ID — 2404.......................................................................................................................... 191 Event ID — 2405..........................................................................................................................192 Event ID — 2407........................................................................
Event ID — 2902......................................................................................................................... 206 Event ID — 2903......................................................................................................................... 207 Event ID — 2904......................................................................................................................... 207 Event ID — 2905..........................................................................
Operating System Generated System Events.................................................................................. 241 Cable Interconnect Events............................................................................................................... 241 Battery Events................................................................................................................................... 242 Power And Performance Events..................................................................
1 Introduction Dell OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 7.1.2 and displayed in the Server Administrator alert log. Server Administrator creates events in response to sensor status changes and other monitored parameters.
Storage Management 4.3 Product Versions to which changes apply Storage Management 4.3.0 New Alerts 2699, 2700, 2701, 2702, 2703, 2704, 2705, 2874, 2875, 2876, 2900, 2901, 2902, 2903, 2904, 2905, 2906, 2907, 2908, 2909, 2910, 2911, 2912, 2913, 2914, 2915, 2916, 2917, 2918, 2919, 2920, 2921, 2922, 2923, 2924, 2930, 2931, 2932, 2933 Deleted Alerts None Modified Alerts None Server Administrator 7.3.0 Storage Management 4.2 Product Versions to which changes apply Storage Management 4.2.
Modified Alerts 2388, 2347, 2081 Storage Management 3.4 Product Versions to which changes apply Storage Management 3.4.0 New Alerts 2405, 2406, 2407, 2408, 2409, 2410, 2411, 2412, 2413, 2414, 2415, 2416, 2417, 2418 Server Administrator 6.4.0 NOTE: The CacheCade feature is available from calendar year 2011. Deleted Alerts None Modified Alerts None Storage Management 3.3 Product Versions to which changes apply Storage Management 3.3.
Understanding Event Messages Add your section content here.This section describes the various types of event messages generated by the Server Administrator. When an event occurs on your system, Server Administrator sends information about one of the following event types to the systems management console: Table 2. Understanding Event Messages Icon Alert Severity Component Status OK /Normal / Informational An event that describes the successful operation of a unit.
• AC Power Cord Sensor — Monitors the presence of AC power for an AC power cord. • Hardware Log Sensor — Monitors the size of a hardware log. • Processor Sensor — Monitors the processor status in the system. • Pluggable Device Sensor — Monitors the addition, removal, or configuration errors for some pluggable devices, such as memory cards. • Battery Sensor — Monitors the status of one or more batteries in the system.
NOTE: The default name of the operating system log file is /var/log/messages, and you can view the operating system log file using a text editor such as vi or emacs. The Server Administrator event log file is named dcsys.xml,where xx is either 32 or 64 bit depending on the operating system.
Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1000 Server Administrator starting Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1001 Server Administrator startup complete Feb 6 14:21:21 server01 Server Administrator: Instrumentation Service EventID: 1254Chassis intrusion detected Sensor location: Main chassis intrusion Chassis location: Main System Chassis Previous state was: OK (Normal) Chassis intrusion state: Open Feb 6 14:21:51 server01 Se
Description Line Item Action requested was: Explanation Specifies the action that was requested, for example: Action requested was: Reboot, shutdown OS first Description Line Item Additional Details: Explanation Specifies additional details available for the hot plug event, for example: Memory device: DIMM1_A Serial number: FFFF30B1 Description Line Item Explanation Specifies information pertaining to the eve
Description Line Item Discrete current state: Explanation Specifies the state of the current sensor, for example: Discrete current state: Good Description Line Item Discrete temperature state: Explanation Specifies the state of the temperature sensor, for example: Discrete temperature state: Good Description Line Item Discrete voltage state: Explanation Specifies the state of the voltage sensor, for example: Discrete voltage state: Good Description Line Item Fan sensor v
Description Line Item Possible memory module event cause: Explanation Specifies a list of possible causes for the memory module event, for example: Possible memory module event cause: Single bit warning error rate exceeded Single bit error logging disabled Description Line Item Power Supply type: Explanation Specifies the type of power supply, for example: Power Supply type: VRM Description Line Item Previous redundancy state was: Explanation Specif
Description Line Item Temperature sensor value: Explanation Specifies the temperature in degrees Celsius, for example: Temperature sensor value (in degrees Celsius): 30 Description Line Item Voltage sensor value (in Volts): Explanation Specifies the voltage sensor value in volts, for example: Voltage sensor value (in Volts): 1.
Server Management Messages 2 The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause. NOTE: For corrective actions, see the appropriate documentation. Server Administrator General Messages The messages below indicate that certain alert systems are up and working. Event ID — 0000 Description Log was cleared Severity Information Cause User cleared the log from Server Administrator.
Event ID — 1002 Description A system BIOS update has been scheduled for the next reboot Severity Information Cause The user has chosen to update the flash basic input/output system (BIOS). Event ID – 1003 Description A previously scheduled system BIOS update has been canceled Severity Information Cause The user decides to cancel the flash BIOS update, or an error occurs during the flash.
Event ID — 1007 Description User initiated host system control action Action requested was: Severity Information Cause User requested a host system control action to reboot, power off, or power cycle the system. Alternatively, the user had indicated protective measures to be initiated in the event of a thermal shutdown. Event ID — 1008 Description Systems Management Data Manager Started Severity Information Cause Systems Management Data Manager services were started.
Event ID — 1013 Description System Peak Power detected new peak value Peak value (in Watts): Severity Information Cause The system peak power sensor detected a new peak value in power consumption. The new peak value in Watts is provided.
If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or the carrier in the specified system failed. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system returned to a valid range after crossing a failure threshold. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Event ID — 1055 Description Temperature sensor detected a non-recoverable value Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system detected an error from which it cannot recover.
Fan sensor value: Severity Error Cause A fan sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal fan sensor value information is provided.
Severity Error Cause A fan sensor in the specified system detected the failure of one or more fans. The sensor location, chassis location, previous state, and fan sensor value information is provided. Event ID — 1105 Description Fan sensor detected a non-recoverable value Sensor location: Chassis location: Previous state was: Fan sensor value: Severity Error Cause A fan sensor detected an error from which it cannot recover.
Event ID — 1151 Description Voltage sensor value unknown Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal voltage sensor value are provided.
Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and voltage sensor value information is provided.
If sensor type is discrete: Discrete voltage state: Severity Error Cause A voltage sensor in the specified system detected an error from which it cannot recover. The sensor location, chassis location, previous state, and voltage sensor value information is provided. Current Sensor Messages The current sensors listed measure the amount of current (in amperes) that is traversing critical components.
Current sensor value (in Amps): OR Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A current sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal current sensor value information is provided.
Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A current sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and current sensor value are provided.
If sensor type is discrete: Discrete voltage state: Severity Error Cause A current sensor in the specified system detected an error from which it cannot recover. The sensor location, chassis location, previous state, and current sensor value are provided. Chassis Intrusion Messages The chassis intrusion messages listed are a security measure. Chassis intrusion means that someone is opening the cover to a system’s chassis. Alerts are sent to prevent unauthorized removal of parts from a chassis.
Event ID — 1254 Description Chassis intrusion detected Sensor location: Chassis location: Previous state was: Chassis intrusion state: Severity Critical Cause A chassis intrusion sensor in the specified system detected that the system cover was opened while the system was operating. The sensor location, chassis location, previous state, and chassis intrusion state information is provided.
Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy are provided.
redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy information is provided. Event ID — 1305 Description Redundancy degraded Redundancy unit: Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system detected that one of the components of the redundancy unit has failed but the unit is still redundant.
If in configuration error state: Configuration error type: Severity Warning Cause A power supply sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided.
supply type, additional power supply status, and configuration error type information are provided.
Event ID — 1401 Description Memory device status is Memory device location: Possible memory module event cause: Severity Informational Cause Memory device status is unknown. The memory module may not be correctly seated, wrongly configured, or has failed.
the memory error on multi-bit ECC error. The memory device status and possible memory module event cause information is provided. Event ID — 1405 Description Memory device status is Memory device location: Possible memory module event cause: Severity Informational Cause Memory device status is nonrecoverable. The memory module failed because of an irrecoverable error.
Log type: Severity Information Cause The hardware log on the specified system is no longer near or at its capacity, usually as the result of clearing the log. The log type information is provided. Event ID — 1553 Description Log size is near capacity Log type: Severity Warning Cause The size of a hardware log on the specified system is near or at the capacity of the hardware log. The log type information is provided.
Previous state was: Processor sensor status: Severity Warning Cause A processor sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state and processor sensor status information is provided.
Processor sensor status: Severity Error Cause A processor sensor in the specified system is disabled, has a configuration error, or experienced a thermal trip. The sensor location, chassis location, previous state and processor sensor status are provided. Pluggable Device Messages The pluggable device messages listed provides status and error information when some devices, such as memory cards, are added or removed.
Cause A device was removed from the specified system. The device location, chassis location, and additional event details, if available, are provided. Event ID — 1653 Description Device configuration error detected Device location: Chassis Location: Additional details: Severity Error Cause A configuration error was detected for a pluggable device in the specified system.
Cause A battery sensor in the specified system could not retrieve a reading. The sensor location, chassis location, previous state, and battery sensor status information is provided.
Cause A battery sensor in the specified system detected that a battery has failed. The sensor location, chassis location, previous state, and battery sensor status information is provided. Event ID — 1705 Description Battery sensor detected a non-recoverable value Sensor location: Chassis Location: Previous state was: Battery sensor status: Severity Error Cause A battery sensor in the specified system could not retrieve a value.
Previous state was: SD card device type: SD card state: Severity Information Cause An SD card device sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
Event ID — 1754 Description SD card device detected a failure Sensor location: Chassis Location: Previous state was: SD card device type: SD card state: Severity Error Cause An SD card device sensor in the specified system detected an error. The sensor location, chassis location, previous state, and SD card device type information is provided.
Severity Informational Cause A user-initiated test trap was issued, through the CMC GUI or RACADM CLI. Event ID — 2002 Description CMC reported a return-to-normal or informational event. Severity Informational Cause CMC informational event, as described in the drsCAMessage variable binding supplied with the alert. Event ID — 2003 Description CMC reported a warning. Severity Warning Cause CMC warning event, as described in the drsCAMessage variable supplied with the alert.
3 Storage Management Message Reference The Server Administrator Storage Management’s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks. Alert Monitoring and Logging The Storage Management Service performs alert monitoring and logging. By default, the Storage Management service starts when the managed system starts up. If you stop the Storage Management Service, then alert monitoring and logging stops.
Table 3.
Storage Object Message Variables For example, 2057 Virtual disk degraded: Virtual Disk 11 (Virtual Disk 11) Controller 1 (PERC 5/E Adapter) NOTE: The virtual disk and controller names are not always displayed.
Storage Object Message Variables For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Target ID 6 Message Format: EMM X Controller A, Connector B, Enclosure C SAS EMM For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Enclosure 2 Alert Descriptions and Corrective Actions The following sections describe alerts generated by the RAID or SCSI controllers supported by Storage Management.
Event ID — 2049 Description Physical disk removed. Severity Warning / Non-critical Cause and Action Cause: A physical disk has been removed from the disk group. This alert can also be caused by loose or defective cables or by problems with the enclosure. Action: If a physical disk was removed from the disk group, either replace the disk or restore the original disk. On some controllers, a removed disk has a red X for its status.
Severity Warning / Non-critical Cause and Action Cause: A physical disk has reported an error condition and may be degraded. The physical disk may have reported the error condition in response to a SMART Trip (Predictive Failure). Action: Replace the degraded physical disk. You can identify which disk is degraded by locating the disk that has a Yellow Triangle for its status. Perform a rescan after replacing the disk.
SNMP Trap Numbers 1201 Event ID — 2054 Description Virtual disk deleted. Severity Informational Cause and Action Cause: A virtual disk has been deleted. Performing a Reset Configuration may detect that a virtual disk has been deleted. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1201 Event ID — 2055 Description Virtual disk configuration changed.
Action: Create a new virtual disk and restore from a backup. Related Alert Information Clear Alert Number: None Related Alert Number: 2048, 2049, 2050, 2076, 2079, 2081, 2129, 2346 Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2057 Description Virtual disk degraded. Severity Warning / Non-critical Cause and Action Cause 1: This alert message occurs when a physical disk included in a redundant virtual disk fails.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2059 Description Virtual disk format started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: 2088 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2062 Description Physical disk initialization started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: 2091 Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2065 Description Physical disk rebuild started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2070 Description Virtual disk initialization cancelled. Severity OK / Normal / Informational Cause and Action Cause: The virtual disk initialization cancelled because a physical disk included in the virtual disk has failed or because a user cancelled the virtual disk initialization. Action: If a physical disk failed, then replace the physical disk. You can identify which disk has failed by locating the disk that has a red “X” for its status. Perform a rescan after replacing the disk.
Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2076 Description Virtual disk Check Consistency failed. Severity Critical / Failure / Error Cause and Action Cause: AA physical disk included in the virtual disk failed or there is an error in the parity information. A failed physical disk can cause errors in parity information. Action: Replace the failed physical disk.
Severity Critical / Failure / Error Cause and Action Cause: A physical disk included in the virtual disk has failed or a user has cancelled the initialization. Action: If a physical disk has failed, then replace the physical disk Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2080 Description Physical disk initialization failed.
Related Alert Information • If the file backup fails, try to restore the failed file from a previous backup. • When the backup with the Verify option is complete without any errors, delete the Virtual Disk. • Recreate a new Virtual Disk with new drives. • Restore the data from backup. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2082 Description Virtual disk rebuild failed.
Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2085 Description Virtual disk check consistency completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2085 is a clear alert for alert 2058. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2086 Description Virtual disk format completed.
Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2088 Description Virtual disk initialization completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Action: None Clear Alert Number: Alert 2088 is a clear alert for alerts 2061 and 2136.
Action: None Related Alert Information Clear Alert Number: Alert 2090 is a clear alert for alert 2063. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2091 Description Virtual disk rebuild completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2091 is a clear alert for alert 2064.
Cause and Action Cause: The physical disk is predicted to fail. Many physical disks contain Self Monitoring Analysis and Reporting Technology (SMART). When enabled, SMART monitors the health of the disk based on indications such as the number of write operations that have been performed on the disk. Action: Replace the physical disk. Even though the disk may not have failed yet, it is strongly recommended that you replace the disk.
Cause and Action Cause: A user has assigned a physical disk as a global hot spare. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2277 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2099 Description Global hot spare unassigned.
Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. See the physical disk enclosure documentation for more diagnostic information.
Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 1054 Event ID — 2103 Description Temperature dropped below the minimum failure threshold. Severity Critical / Failure / Error Cause and Action Cause: The physical disk enclosure is too cool. Related Alert Information Action: Check if the thermostat setting is too low and if the room temperature is too cool.
Related Alert Information Clear Alert Number: Alert 2105 is a clear alert for alert 2104. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2106 Description SMART FPT exceeded. Severity Warning / Non-critical Cause and Action Cause: A disk on the specified controller has received a SMART alert (predictive failure) indicating that the disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert.
SNMP Trap Numbers 904 Event ID — 2108 Description SMART warning. Severity Warning / Non-critical Cause and Action Cause: A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert. If the physical disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk.
CAUTION: Removing a physical disk that is included in a non-redundant virtual disk causes the virtual disk to fail and may cause data loss. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2110 Description SMART warning degraded. Severity Warning / Non-critical Cause and Action Cause: A disk is degraded and has received a SMART alert (predictive failure).
Event ID — 2112 Description Enclosure was shut down. Severity Critical / Failure / Error Cause and Action Cause: The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range. Action: Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source.
Action: None Related Alert Information Clear Alert Number: Alert 2115 is a clear alert for alert 2114. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2116 Description A virtual disk and its mirror have been split. Severity OK / Normal / Informational Cause and Action Cause: A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy.
SNMP Trap Numbers 1201 Event ID — 2118 Description Change write policy. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the write policy for a virtual disk. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2120 Description Enclosure firmware mismatch.
Action: None Related Alert Information Clear Alert Number: Alert 2121 is a clear alert for alert 2048. Related Alert Number: 2050, 2065, 2158 Local Response Agent (LRA) Number: None SNMP Trap Numbers 752,802, 852, 902, 952, 1002,1052, 1102, 1152, 1202 Event ID — 2122 Description Redundancy degraded. Severity Warning / Non-critical Cause and Action Cause: One or more of the enclosure components has failed. For example, a fan or power supply may have failed.
failed. For example, the enclosure may have suffered the loss of all fans or all power supplies. Action: Identify and replace the failed components. To identify the failed component, select the Storage object and click the Health subtab. The controller status displayed on the Health subtab indicates whether a controller has a Failed or Degraded component. Click the controller that displays a Warning or Failed status.
Action: Import foreign disks, if any. Check if the enclosure containing the virtual disk is disconnected from the controller. Related Alert Information Clear Alert Number: 2186, 2240 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1203 Event ID — 2126 Description SCSI sense sector reassign. Severity Warning / Non-critical Cause and Action Cause: A sector of the physical disk is corrupted and data cannot be maintained on this portion of the disk.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2128 Description BGI cancelled. Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has been cancelled. A user or the firmware may have stopped BGI. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2129 Description BGI failed.
Action: None Related Alert Information Clear Alert Number: Alert 2130 is a clear alert for alert 2127. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2131 Description Firmware version mismatch. Severity Warning / Non-critical Cause and Action Cause: The firmware on the controller is not a supported version. Related Alert Information Clear Alert Number: None Action: Install a supported version of the firmware.
Event ID — 2135 Description Array Manager is installed on the system. NOTE: This is not supported on Server Administrator version 6.0.1. Severity Warning / Non-critical Cause and Action Cause: Storage Management has been installed on a system that has an Array Manager installation. Action: Installing Storage Management and Array Manager on the same system is not a supported configuration. Uninstall either Storage Management or Array Manager.
hardware, or firmware problems, bad or failed power supplies, and enclosure shutdown. When viewed in the alert log, the description for this event displays several variables. These variables are: controller and enclosure names, type of communication problem, return code, and SCSI status. Action: Check for problems with the cables. See the online help for more information on checking the cables. You should also check to see if the enclosure has degraded or failed components.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2140 Description Dead disk segments restored. Severity OK / Normal / Informational Cause and Action Cause: Disk space that was formerly “dead” or inaccessible to a redundant virtual disk has been restored. This alert is for informational purposes.
Event ID — 2142 Description Controller rebuild rate has changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the controller rebuild rate. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2143 Description Controller alarm enabled.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2145 Description Controller battery low. Severity Warning / Non-critical Cause and Action Cause: The controller battery charge is low. Related Alert Information Clear Alert Number: None Action: Recondition the battery. See the online help for more information. Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2146 Description Bad block replacement error.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2148 Description Bad block medium error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Related Alert Information Action: See the Server Administrator Storage Management online help for more information.
Cause and Action Cause: A portion of a physical disk is damaged. Related Alert Information Clear Alert Number: None Action: See the Server Administrator Storage Management online help for more information. Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2151 Description Enclosure asset tag changed Severity OK / Normal / Informational Cause and Action Cause: A user has changed the enclosure asset tag. This alert is for informational purposes.
Event ID — 2153 Description Enclosure service tag changed. Severity OK / Normal / Informational Cause and Action Cause: An enclosure service tag was changed. In most circumstances, this service tag should only be changed by your service provider. Action: Ensure that the tag was changed under authorized circumstances.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1051 Event ID — 2156 Description Controller alarm has been tested. Severity OK / Normal / Informational Cause and Action Cause: The controller alarm test has run successfully. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2157 Description Controller configuration has been reset.
Action: None Related Alert Information Clear Alert Number: Alert 2158 is a clear alert for alert 2050. Related Alert Number: 2048, 2050, 2065, 2099, 2121, 2196, 2201, 2203 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2159 Description Virtual disk renamed. Severity OK / Normal / Informational Cause and Action Cause: A user has renamed a virtual disk.
SNMP Trap Numbers 901 Event ID — 2161 Description Dedicated hot spare unassigned. Severity OK / Normal / Informational Cause and Action Cause: A physical disk that was assigned as a hot spare has been unassigned and is no longer functioning as a hot spare. The physical disk may have been unassigned by a user or automatically unassigned by Storage Management. Storage Management unassigns hot spares that have been used to rebuild data.
Event ID — 2163 Description Rebuild completed with errors. Severity OK / Normal / Informational Cause and Action Cause: During a rebuild one or more blocks of data was not recoverable due to missing parity information. Some data loss may have occurred. Action: Perform a check to verify the built array. Any files that are impacted should be restored from a backup. See the Storage Management online help for more information.
situation may occur for a variety of reasons. For example, the installation directory path to the configuration file may not be correct. The configuration file may also have been removed or renamed. Action: Reinstall Storage Management Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2166 Description The RAID controller firmware and driver validation was not performed.
Action: See the Readme file for a list of validated kernel and driver versions. Update the system to meet the minimum requirements and then reinstall Storage Management. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2050 SNMP Trap Numbers 103 Event ID — 2168 Description The non-RAID SCSI driver version is older than the minimum required level. See readme.txt for the validated driver version.
Local Response Agent (LRA) Number: 2101 SNMP Trap Numbers 1154 Event ID — 2170 Description The controller battery charge level is normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2171 Description The controller battery temperature is above normal.
Action: None Related Alert Information Clear Alert Number: Alert 2172 is a clear alert for alert 2171. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2173 Description Unsupported configuration detected. The SCSI rates of the enclosure management modules (EMMs) are not the same. EMM 0 % 1 EMM 1 % 2 Severity Warning / Non-critical Cause and Action Action: Replace one of the EMMs with the matching SCSI rate EMM.
Event ID — 2175 Description The controller battery has been replaced. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2176 Description The controller battery Learn cycle has started.
SNMP Trap Numbers 1151 Event ID — 2178 Description The controller battery Learn cycle has timed out. Severity Warning / Non-critical Cause and Action Cause: The controller battery must be fully charged before the Learn cycle can begin. The battery may be unable to maintain a full charge causing the Learn cycle to timeout. Additionally, the battery must be able to maintain cached data for a specified period of time in the event of a power loss.
Cause and Action Cause: This alert is for informational purposes. The %1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2181 Description The controller battery learn cycle starts in % 1 hours.
SNMP Trap Numbers 754 Event ID — 2183 Description Replace Member Operation failed on physical disk % 1 from physical disk % 2. Severity Critical / Failure / Error Cause and Action Cause: The physical disk participating in the Replace Member Operation, operation has failed.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2186 Description The controller cache has been discarded. Severity Warning / Non-critical Cause and Action Cause: The controller has flushed the cache and any data in the cache has been lost. This may happen if the system has memory or battery problems that cause the controller to distrust the cache. Although user data may have been lost, this alert does not always indicate that relevant or user data has been lost.
unable to maintain cached data for 24 hours. It is normal to receive this alert during the battery Learn cycle as the Learn cycle discharges the battery before recharging it. When discharged, the battery cannot maintain cached data. Action: Check the health of the battery. If the battery is weak, replace the battery pack.
Event ID — 2191 Description Multiple enclosures are attached to the controller. This is an unsupported configuration. Severity Critical / Failure / Error Cause and Action Cause: There are too many enclosures attached to the controller port. When the enclosure limit is exceeded, the controller loses contact with all enclosures attached to the port. Action: Remove the last enclosure. You must remove the enclosure that has been added last and is causing the enclosure limit to exceed.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2194 Description The virtual disk Read policy has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2197 Description Physical disk Replace Member Operation stopped for rebuild. Severity Warning Cause and Action Cause: This alert is provided for informational purposes.
Severity Informational Cause and Action Cause: User has provided invalid input for the chosen operation. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2200 Description Replace Member Operation not possible as SAS/SATA is not supported in the same virtual disk. Severity Warning/ Non-critical Cause and Action Cause: This alert is for informational purposes.
SNMP Trap Numbers 903 Event ID — 2202 Description A global hot spare has been removed. Severity OK / Normal / Informational Cause and Action Cause: The controller is unable to communicate with a disk that is assigned as a global hot spare. The disk may have been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed. Check the cables. If necessary, replace the disk and reassign the hot spare.
Cause and Action Cause: The controller is unable to communicate with a disk that is assigned as a dedicated hot spare. The disk may have been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed. Check the cables. If necessary, replace the disk and reassign the hot spare.
Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2207 Description The only hot spare available is a SAS disk. SAS disks cannot replace SATA disks. Severity Warning / Non-critical Cause and Action Cause: The only physical disk available to be assigned as a hot spare is using SAS technology. The physical disks in the virtual disk are using SATA technology.
Cause and Action Cause: The physical disk may not have a supported version of the firmware or the disk may not be supported by your service provider. Action: If the disk is supported, update the firmware to a supported version. If the disk is not supported by your service provider, replace the disk with one that is supported.
Event ID — 2214 Description Battery charge in progress. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2215 Description Battery charge process interrupted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
SNMP Trap Numbers 1151 Event ID — 2217 Description The battery learn mode has changed to warn. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2218 Description None of the Controller Property are set.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2220 Description Replace Member Operation, Auto Replace Member Operation on Predictive Failure and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2223 Description Abort Check Consistency on Error, Replace Member Operation and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2225 Description Abort Check Consistency on Error and Load balance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2226 Description Load balance changed.
SNMP Trap Numbers 751 Event ID — 2228 Description Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2231 Description Replace Member Operation and Abort Check Consistency on Error changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2234 Description The Patrol Read rate has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: Change at least one controller property and run the command again. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2237 Description Abort Check Consistency on Error modified. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity OK / Normal / Informational Cause and Action Cause: The user has attempted to clear a foreign configuration. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2240 Description A foreign configuration has been imported.
Event ID — 2242 Description The Patrol Read operation has started. Severity OK / Normal / Informational Cause and Action Cause: The controller has started the Patrol Read operation. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2243 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2243 Description The Patrol Read operation has stopped.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2245 Description A virtual disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: 2358 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2248 Description The controller battery is executing a Learn cycle. Severity OK / Normal / Informational Cause and Action Action: None Related Alert Information Cause: This alert is for informational purposes.
Cause and Action Cause: The redundant path is broken. Related Alert Information Clear Alert Number: 2370 Action: Check the connection to the enclosure, which is degraded. Related Alert Number: 2370 Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2251 Description The physical disk blink has initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2254 Description The Clear operation has cancelled. Severity OK / Normal / Informational Cause and Action Action: None Related Alert Information Cause: This alert is for informational purposes.
Event ID — 2257 Description Controller preserved cache is discarded. Severity Warning /Non-critical Cause and Action Cause: The controller cache is discarded by the user. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2258 Description Controller has preserved cache.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2260 Description An enclosure blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2261 Description A global rescan has initiated.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2263 Description SMART thermal shutdown is disabled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Severity Warning / Non-critical Cause and Action Cause: The controller cannot communicate with a device. The state of the device cannot be determined. There may be a bad or loose cable. The system may also be experiencing problems with the application programming interface (API). There could also be a problem with the driver or firmware. Action: Check the cables. Check if the controller has a supported version of the driver and firmware.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2268 Description %1, Storage Management has lost communication with the controller. An immediate reboot is strongly recommended to avoid further problems. If the reboot does not restore communication, then contact technical support for more information.
SNMP Trap Numbers 901 Event ID — 2270 Description The physical disk Clear operation failed. Severity Critical / Failure / Error Cause and Action Cause: A Clear task was being performed on a physical disk but the task was interrupted and did not complete successfully. The controller may have lost communication with the disk. The disk may have been removed or the cables may be loose or defective. Action: Verify that the disk is present and not in a Failed state.
Cause and Action Cause: The Patrol Read task has encountered an error that cannot be corrected. There may be a bad disk block that cannot be remapped. Action: Back up your data. If you are able to back up the data successfully, then fully initialize the disk and then restore from back up.
SNMP Trap Numbers 901 Event ID — 2276 Description The dedicated hot spare is too small. Severity Warning / Non-critical Cause and Action Cause: The dedicated hot spare is not large enough to protect all virtual disks that reside on the disk group. Action: Assign a larger disk as the dedicated hot spare.
Action 1: Check if the battery Learn cycle is in progress. The battery also displays the Learn state while the Learn cycle is in progress. Action 2: If a Learn cycle is not in progress, replace the battery pack. Related Alert Information Clear Alert Number: None Related Alert Number: 2199 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1153 Event ID — 2279 Description The controller battery charge level is operating within normal limits.
SNMP Trap Numbers 1201 Event ID — 2281 Description Virtual disk has inconsistent data. Severity OK / Normal / Informational Cause and Action Cause: The virtual disk has inconsistent data. This may be caused when a power loss or system shutdown occurs while data is being written to the virtual disk. This alert is for informational purposes.
Cause and Action Cause: The controller has two connectors that are connected to the same enclosure. The communication path on one connector has lost connection with the enclosure. The communication path on the other connector is reporting this loss. Action: Make sure the cables are attached securely and both enclosure management modules (EMMs) are healthy. See the Cables Attached Correctly section for more information on checking the cables.
SNMP Trap Numbers 901 Event ID — 2286 Description A Learn cycle start is pending while the battery charges. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2287 Description Protection policy has been changed.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2289 Description Multi-bit ECC error on controller DIMM. Severity Critical / Failure / Error Cause and Action Cause: An error involving multiple bits has been encountered during a read or write operation. The error correction algorithm recalculates parity data during read and write operations.
Event ID — 2291 Description An enclosure management module (EMM) has been discovered. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2292 Description Communication with the enclosure has been lost.
Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2294 Description A device has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2295 Description A device has been removed.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 951 Event ID — 2297 Description An EMM has been removed. Severity Critical / Failure / Error Cause and Action Cause: An EMM has been removed. Related Alert Information Clear Alert Number: None Action: Reinsert the EMM. See the hardware documentation for information on replacing the EMM.
Event ID — 2299 Description Bad PHY %1 Severity Critical / Failure / Error Cause and Action Cause: There is a problem with a physical connection or PHY. The %1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation. Action: Contact your technical support.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2302 Description The enclosure is not responding.
Event ID — 2304 Description An attempt to hot plug an EMM has been detected. This type of hot plug is not supported. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: 2211 Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2305 Description The physical disk is too small to be used for a rebuild.
Action: Back up your data. Replace the disk generating this alert and restore from back up. Related Alert Information Clear Alert Number: None Related Alert Number: 2307 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2307 Description Bad block table is full. Unable to log block %1. Severity Critical / Failure / Error Cause and Action Cause: The bad block table is used for remapping bad disk blocks. This table fills, as bad disk blocks are remapped.
Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2310 Description A virtual disk is permanently degraded. Severity Critical / Failure / Error Cause and Action Cause: A redundant virtual disk has lost redundancy. This may occur when the virtual disk suffers the failure of multiple physical disks. In this case, both the source physical disk and the target disk with redundant data have failed. A rebuild is not possible because there is no redundancy.
Event ID — 2312 Description A power supply in the enclosure has an AC failure. Severity Warning / Non-critical Cause and Action Action: Replace the power supply. Related Alert Information Cause: The power supply has an AC failure. Clear Alert Number: 1003 Related Alert Number: 2122, 2324 Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 1003 Event Id — 2313 Description A power supply in the enclosure has a DC failure.
Related Alert Number: None Local Response Agent (LRA) Number: 2051 SNMP Trap Numbers 104 Event Id — 2315 Description Diagnostic message %1 Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the utility that ran the diagnostics and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is for informational purposes.
Event ID — 2318 Description Problems with the battery or the battery charger have been detected. The battery health is poor. Severity Warning / Non-critical Cause and Action Cause: The battery or the battery charger is not functioning properly. Related Alert Information Clear Alert Number: None Action: Replace the battery pack. Related Alert Number: 2188 Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2319 Description Single-bit ECC error. The DIMM is degrading.
Related Alert Information Clear Alert Number: None Related Alert Number: 2321 Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2321 Description Single-bit ECC error. The DIMM is critically nonfunctional. There is no further reporting. Severity Critical / Failure / Error Cause and Action Cause: The DIMM is malfunctioning. Data loss or data corruption is imminent. No further alerts are generated. Action: Replace the DIMM immediately.
Event ID — 2323 Description The power supply is switched on. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Status: Alert 2323 is a clear alert for alerts 2313 and 2322. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1001 Event ID — 2324 Description The AC power supply cable has been removed.
SNMP Trap Numbers 1001 Event ID — 2326 Description A foreign configuration has been detected. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. The controller has physical disks that were moved from another controller. These physical disks contain virtual disks that were created on the other controller.
Cause and Action Cause: The NVRAM has corrupt data. The controller is unable to correct the situation. Action: Replace the controller. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 20601 SNMP Trap Numbers 753 Event ID — 2329 Description SAS port report: %1 Severity Warning / Non-critical Cause and Action Cause: The text for this alert is generated by the controller and can vary depending on the situation.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2331 Description A bad disk block has been reassigned. Severity OK / Normal / Informational Cause and Action Cause: The disk has a bad block. Data has been readdressed to another disk block and no data loss has occurred. Action: Monitor the disk for other alerts or indications of poor health. For example, you may receive alert 2306.
Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text is from events in the controller event log that were generated while Storage Management was not running. This text can vary depending on the situation. This alert is for informational purposes.
Action: See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2337 Description The controller is unable to recover cached data from the battery backup unit (BBU). Severity Critical / Failure / Error Cause and Action Cause: The controller was unable to recover data from the cache.
Event ID — 2339 Description The factory default settings have been restored. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2340 Description The BGI completed with uncorrectable errors.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2342 Description The Check Consistency found inconsistent parity data. Data redundancy may be lost. Severity Warning / Non-critical Cause and Action Cause: The data on a source disk and the redundant data on a target disk is inconsistent. Action: Restart the Check Consistency task.
Event ID — 2344 Description The virtual disk initialization terminated. Severity Warning / Non-critical Cause and Action Cause: A user has cancelled the virtual disk initialization. Related Alert Information Clear Alert Number: None Action: Restart the initialization. Related Alert Number: None Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1203 Event ID — 2345 Description The virtual disk initialization failed.
hardware. Make sure that the cables are attached securely. See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: 2048, 2050, 2056, 2057, 2076, 2079, 2081, 2083, 2095, 2129, 2201, 2203, 2270, 2282, 2369 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2347 Description The rebuild failed due to errors on the source physical disk.
Related Alert Information Clear Alert Number: None Related Alert Number: 2195, 2346 Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2349 Description A bad disk block could not be reassigned during a write operation. Severity Critical / Failure / Error Cause and Action Cause: A write operation could not complete because the disk contains bad disk blocks that could not be reassigned. Data loss may have occurred and data redundancy may also be lost. Action: Replace the disk.
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: 2352 Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2352 Description A physical disk that was marked as missing has been replaced. Severity OK / Normal / Informational Cause and Action Action: None Related Alert Information Cause: This alert is for informational purposes.
Event ID — 2354 Description Enclosure firmware download in progress. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2355 Description Enclosure firmware download failed.
Cause and Action Cause: The text for this alert is generated by the firmware and can vary depending on the situation. The reference to SMP in this text refers to SAS Management Protocol. Action: There may be a SAS topology error. See the hardware documentation for information on correct SAS topology configurations. There may be problems with the cables such as a loose connection or an invalid cabling configuration. See the Cables Attached Correctly section for more information on checking the cables.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2359 Description Disk found is not supplied by an authorized hardware provider. Severity Warning / Non-critical Cause and Action Cause: The physical disk does not comply with the standards set and is not supported. Action: Replace the physical disk with a physical disk that is supported.
Severity Warning Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2362 Description Physical disk(s) have been removed from a virtual disk. The virtual disk is in Failed state during the next system reboot. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2366 Description Dedicated spare imported as global due to missing arrays. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Related Alert Information Clear Alert Number: None Related Alert Number: 2049, 2052, 2162, 2292 Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2369 Description Virtual Disk Redundancy has been degraded. Severity OK / Normal / Informational Cause and Action Cause: A physical disk in a RAID 6 virtual disk has either failed or been removed. Related Alert Information Clear Alert Number: 2121 Action: Replace the missing or failed physical disk.
Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2372 Description Attempted import of Virtual Disk exceeding the limit supported on the controller. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None.
Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes and is displayed when you attempt to import a foreign virtual disk with a missing span. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2375 Description Attempted import of Virtual Disk with missing physical disk.
Event ID — 2377 Description Attempted import of an orphan drive. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import an orphan drive. This alert is provided for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2378 Description Attempted import of an incompatible physical drive.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2380 Description Foreign configuration has been partially imported. Some configuration failed to import. Severity OK / Normal / Informational Cause and Action Action: None. Related Alert Information Cause: This alert is provided for informational purposes.
Action: Replace the unsupported physical disk with a physical disk of media type HDD. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2383 Description The Information level set for the hot spare protection policy is violated for the Virtual Disk. Severity OK / Normal / Informational Cause and Action Cause: The number of physical disks you specified for the hot spare protection policy is violated.
SNMP Trap Numbers 1203 Event Id — 2385 Description The Critical level set for the hot spare protection policy is violated for the Virtual Disk. Severity Critical / Failure / Error Cause and Action Cause: The number of physical disks you specified for the hot spare protection policy is violated. Action: Reassign the number of hot spares as specified in the protection policy for that RAID level.
Related Alert Information 1. Perform a backup of the virtual disk with the Verify option selected. One of the following can occur: • Backup operation fails. In this case, restore the file from a previous backup. After restoring the file, run Patrol Read and check for bad blocks. If more bad blocks exist, proceed to step 2. • Backup operation completes without error. This indicates that there are no bad blocks on your virtual disk. • Backup operation displays bad blocks.
SNMP Trap Numbers 1201 Event ID — 2390 Description The Instant Encrypt Erase operation is performed on the physical disk. Severity OK / Normal / Informational Cause and Action Cause: Instant Encrypt Erase operation is successful on Self Encryption Disks (SEDs.) Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2392 Description The drive Encryption Key is invalid.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2394 Description Persistent Hot Spare is enabled. Severity OK / Normal / Informational Cause and Action Cause: The Persistent Hot Spare option is enabled. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2395 Description Persistent Hot Spare is disabled.
Action: Replace the failed physical disk. You can identify the failed disk by locating the disk that has a red “X” for its status. Rebuild the physical disk. When finished, restart the check consistency operation. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1204 Event ID — 2397 Description The Check Consistency completed with uncorrectable errors.
Event ID — 2399 Description The Physical Disk Power status changed from 1% to 2%. Severity OK / Normal / Informational Cause and Action Cause: The physical disk power status is changed from one state to another. A physical disk can have the following power statuses: spun down, transition, and spun up. Action: None.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 754 Event ID — 2402 Description Changing the Physical Disk Power status from 1% to 2% failed. Severity Failure / Error Cause and Action Cause: When changing the Physical Disk Power status fails. Related Alert Information Action: Replace the physical disk.
Cause and Action Cause: The operating system does not detect the newly created virtual disk. Related Alert Information Clear Alert Number: None Action: Wait for some time. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2405 Description Command timeout on physical disk. Severity Warning Cause and Action Cause: The spundown physical disks take more time than the timeout period and the configuration commands are timed out. Action: None.
Event ID — 2411 Description Controller LKM Encryption key is changed. Severity Informational Cause and Action Action: None. Related Alert Information Cause: Using Manage Encryption Key operations, encryption key is changed. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2412 Description Controller CacheCade is resized. Severity Informational Cause and Action Cause: This alert is provided for informational purposes.
SNMP Trap Numbers 1201 Event ID — 2414 Description Controller CacheCade is deleted. Severity Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2415 Description Controller battery is discharging. Severity Informational Cause and Action Cause: The battery learn cycle has started.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2417 Description There is an unrecoverable medium error detected on virtual disk. Severity Critical / Failure / Error Cause and Action Cause: Unrecoverable medium error found on one or more member physical disks of a virtual disk. Action: Perform a backup of the virtual disk with the Verify option selected. If the Backup operation is successful, it indicates that the un-recoverable medium did not affect user data.
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2425 Description State change on Physical disk from READY to Non-RAID. Severity Informational Cause and Action Cause: User triggered action. Related Alert Information Clear Alert Number: None Action: Configure the drive to be non-raid using CLI/GUI.
Severity Informational Cause and Action Cause: User triggered action. Related Alert Information Clear Alert Number: None Action: Execute "Prepare to Remove" task from UI in a PCIeSSD setup Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2430 Description Physical Device Log Exported. Severity Informational Cause and Action Cause: User triggered action.
Event ID — 2432 Description The PCIeSSD device was found to be in security locked state. Full initialization has to be done on the security locked drive to recover the drive in usable state. Severity Warning Cause and Action Cause: Last full initialization was stopped for some reason and hence the device is in security locked state. Action: Run full initialization to recover the device.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2435 Description Physical Device is approaching read-only mode. Severity Informational Cause and Action Cause: User triggered task. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2436 Description Physical Device is in read-only mode. Severity Critical Cause and Action Cause: User triggered task.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2438 Description The physical device blink has ceased. Severity Informational Cause and Action Cause: User triggered task. Related Alert Information Action: None.
Cause and Action Related Alert Information Cause: None Action: Contact your service provider. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2442 Description The reliability of the PCIe solid state device identified in the message degraded. Data loss is possible.
Event ID — 2444 Description The Patrol Read operation was manually stopped before completion. Severity Informational Cause and Action Cause: User Triggered Task Related Alert Information Clear Alert Number: None Action: If desired, restart the Patrol Read operation at a later time.
SNMP Trap Numbers 1604 . Event ID — 2700 Description The following journal mirror is available. %1 Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2701 Description The following journal mirror is being replaced.(wwn ) %1 : FluidCache. Severity Information Cause and Action No action required.
SNMP Trap Numbers 1603 Event ID — 2703 Description There are not enough journal mirrors available to operate. : FluidCache. Severity Error Cause and Action To resolve the issue, you must ensure that there are at least two journal mirrors that are accessible. You must activate either one or more failed cache devices or use the fldc_restore utility to rebuild the node.
SNMP Trap Numbers 1604 Event ID — 2874 Description The following Cache Device has no associated server in the configuration: %1 : FluidCache. Severity Warning Cause and Action There is a cache device specified in the configuration with no associated cache server configured. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2875 Description The following Disk is beginning flushing.
SNMP Trap Numbers 901 Event ID — 2900 Description The following cache device has failed. (wwn) %1 (path) %2 : FluidCache. Severity Error Cause and Action Replace the failed device. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2901 Description The following storage device is either inaccessible or failed. (wwn) %1 (path) %2 : FluidCache.
SNMP Trap Numbers 1201, 1501 Event ID — 2903 Description The following cache device has been registered. (ww n) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2904 Description The following cache device has been removed. (wwn ) %1 (path) %2 : FluidCache.
SNMP Trap Numbers 901 Event ID — 2906 Description Caching is being removed for the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201, 1501, 1601 Event ID — 2907 Description Caching has been enabled on the following storage device. (wwn) %1 (path) %2 : FluidCache.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2909 Description The following journal mirror is available. %1The following storage device is in an unknown state.(wwn) %1 (path) %2 : FluidCache. Severity Warning Cause and Action Service is required. Contact Dell Technical Support.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1404 Event ID — 2912 Description Resilvering for the following cache device is complete .(wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2913 Description The following failed cache device has completed recovery. (wwn) %1 (path) %2 : FluidCache.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2915 Description No valid license is installed.: FluidCache. Severity Error Cause and Action A valid license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2916 Description Running on an evaluation license. Days remaining %1 (days): FluidCache.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2918 Description Running on an expired evaluation license. Caching functionality is disabled. Expired days: % 1: FluidCache Severity Error Cause and Action A permanent license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2919 Description Running on an expired/invalid license.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2921 Description A license has been removed.: FluidCache. Severity Information Cause and Action A license should be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2922 Description Not enough memory to run necessary services.: FluidCache.
SNMP Trap Numbers 1604 . Event ID — 2924 Description All cache devices have been found and registered.: FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2930 Description Even though caching was enabled in write-back mode, it is currently operating in write-through mode.: FluidCache.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1203, 1503, 1603 Event ID — 2932 Description Caching is no longer degraded to write-through mode and is now operating in write-back mode.: FluidCache. Severity Warning Cause and Action No action required.
System Event Log Messages for IPMI Systems 4 The tables in this chapter list the system event log (SEL) messages, their severity, and cause. NOTE: For corrective actions, see the appropriate documentation. Temperature Sensor Events The temperature sensor event messages help protect critical components by alerting the systems management console when the temperature rises inside the chassis.
Event Message Severity Cause The temperature is less than the lower critical threshold. Critical Temperature of the backplane, system board, system inlet, or the carrier in the specified system entered into critical state. The temperature is greater than the upper warning threshold.
Event Message Severity Cause voltage sensor detected a warning . Warning Voltage of the monitored entity exceeded the warning threshold. voltage sensor returned to normal . Information The voltage of a previously reported is returned to normal state. The voltage is less than the lower warning threshold.
Event Message Severity Cause Fan sensor returned to normal state . Information The fan specified by has returned to its normal operating speed. Fan sensor detected a warning . Warning The speed of the specified fan may not be sufficient to provide enough cooling to the system. Fan Redundancy sensor redundancy degraded.
Event Message Severity Cause Fan RPM is within range. Information The speed of the specified fan is operating in a normal range. Fan is removed. Critical A required fan was removed. Fan was inserted. Information A fan was added. Fan is present. Information The total number of fans present. Fan is absent. Critical A required fan is missing. The fans are redundant.
Event Message Severity Cause status processor sensor disabled. Warning This event is generated for all processors that are disabled. status processor sensor terminator not present. Information This event is generated if the terminator is missing on an empty processor slot. presence was deasserted. Critical This event is generated when the system could not detect the processor. presence was asserted.
Event Message Severity Cause CPU terminator is absent. Warning This event is generated if the terminator is missing on an empty processor slot. CPU is throttled. Warning This event is generated when the processor slows down to prevent overheating. CPU is absent. Critical This event is generated when the system could not detect the processor. CPU is operating correctly. Information This event is generated when the processor recovered from an error.
Event Message Severity Cause predictive failure was asserted. Critical This event is generated when the power supply is about to fail. input lost was asserted. Critical This event is generated when the power supply is unplugged. predictive failure was deasserted. Information This event is generated when the power supply has recovered from an earlier predictive failure event.
Event Message Severity Cause PS 1 Status: Power supply sensor for PS 1, configuration error was asserted. Warning/Critical This event is generated when an invalid power supply configuration is detected. PS 1 Status: Power supply sensor for PS 1, configuration error was deasserted. Information This event is generated when the power supply has recovered from an earlier invalid configuration. Power supply is present. Information This event is generated when the power supply is plugged in.
Event Message Severity Cause The temperature for power supply is outside of range. Critical Temperature of specified power supply entered into critical state. An under voltage fault detected on power supply . Critical The specified power supply detected inefficient voltage. An over voltage fault detected on power supply . Critical The specified power supply detected an over voltage condition. An over current fault detected on power supply .
Memory ECC Events The memory ECC event messages monitor the memory modules in a system. These messages monitor the ECC memory correction rate and the type of memory events that occurred. Table 10. Memory ECC Events Event Message Severity Cause ECC error correction detected on Bank # DIMM [A/B]. Information This event is generated when there is a memory error correction on a particular Dual Inline Memory Module (DIMM). ECC uncorrectable error detected on Bank # [DIMM].
BMC Watchdog Events Enter a short description for your reference topic. This should be one or two sentences that describes the topic content. Table 11. BMC Watchdog Events Event Message Severity Cause BMC OS Watchdog timer expired. Information This event is generated when the BMC watchdog timer expires and no action is set. BMC OS Watchdog performed system reboot.
Event Message Severity Cause was received from Host) and the action is set to power off. The OS watchdog timer expired. Critical This event is generated when the BMC watchdog timer expires and no action is set. Memory Events The memory modules can be configured in different ways in particular systems. These messages monitor the status, warning, and configuration information about the memory modules in the system. Table 12. Memory Events Event Message Severity Cause Memory RAID redundancy degraded.
Event Message Severity Cause Memory Spared redundancy regained. Information This event is generated when the redundancy lost or degraded earlier is regained in a spared memory configuration. Memory RAID is redundant. Information This event is generated when the memory redundancy mode has change to RAID redundant. Memory RAID redundancy is lost. Check memory device at location(s) . Critical This event is generated when redundancy is lost in a RAIDconfigured memory configuration.
Hardware Log Sensor Events The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full. Table 13. Hardware Log Sensor Events Event Message Severity Cause Log full detected. Critical This event is generated when the SEL device detects that only one entry can be added to the SEL before it is full. Log cleared.
Event Message Severity Cause Drive consistency check in progress was deasserted. Information This event is generated when the consistency check of the drive is completed. Drive in critical array was asserted. Critical This event is generated when the drive is placed in critical array. Drive in critical array was deasserted. Information This event is generated when the drive is removed from critical array. Drive in failed array was asserted.
Event Message Severity Cause sensor intrusion was asserted while system was ON. Critical This event is generated when the intrusion sensor detects an intrusion while the system is on. sensor intrusion was asserted while system was OFF. Critical This event is generated when the intrusion sensor detects an intrusion while the system is off. The chassis is open. Critical This event is generated when the intrusion sensor detects an intrusion.
Event Message Severity Cause System Event PCI System Err. Information This event indicates historical data, and is generated when the system has crashed and recovered. System Event PCI Fatal Err. Critical This error is generated when a fatal error is detected on the PCI bus. System Event PCIE Fatal Err. Critical This error is generated when a fatal error is detected on the PCIE bus. POST Err. Critical This event is generated when an error occurs during system boot.
Event Message Severity Cause Memory Removed (BANK# DIMM#) presence was asserted. Information This event is generated when memory is removed from the system. Memory Cfg Err configuration error (BANK# DIMM#) was asserted. Critical This event is generated when memory configuration is incorrect for the system. Mem Redun Gain redundancy regained. Information This event is generated when memory redundancy is regained. Mem ECC Warning transition to noncritical from OK.
Event Message Severity Cause SBE Log Disabled correctable memory error logging disabled was asserted. Critical This event is generated when the ECC single bit error rate is exceeded. CPU Protocol Err transition to nonrecoverable. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU Bus PERR transition to non-recoverable. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
Event Message Severity Cause An I/O channel check error was detected. Critical This event is generated when a critical interrupt is generated in the I/O Channel. A PCI parity error was detected on a component at bus device function . Critical This event is generated when a parity error is detected on the PCI bus. A PCI parity error was detected on a component at slot . Critical This event is generated when a parity error is detected on the PCI bus.
Event Message Severity Cause A fatal error was detected on a component at slot . Critical This error is generated when a fatal error is detected on the PCI bus. A fatal IO error detected on a component at bus device function . Critical This error is generated when a fatal IO error is detected. A fatal IO error detected on a component at slot . Critical This error is generated when a fatal IO error is detected.
Event Message Severity Cause An OEM diagnostic event occurred. Information This event is generated when an OEM event occurs. OEM events can be used by the service team to better understand the cause of the failure. CPU protocol error detected. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU bus parity error detected. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
Event Message Severity Cause Device option ROM on mezzanine card failed to support Link Tuning or FlexAddress. Critical This event is generated when the PCI device option ROM for a NIC does not support link tuning or the Flex addressing feature. Failed to program virtual MAC address on a component at bus device function . Critical This event is generated when BIOS fails to program virtual MAC address on the given NIC device.
Fatal Error Code Description Cause 85 DMA controller failure. This error code indicates DMA controller failure. 86 Interrupt controller failure. This error code indicates interrupt controller failure. 87 Timer refresh failure. This error code indicates timer refresh failure. 88 Programmable interval timer error. This error code indicates a programmable interval timer error. 89 Parity error. This error code indicates a parity error. 8A SIO failure. This error code indicates SIO failure.
Operating System Generated System Events Table 18. Operating System Generated System Events Description Severity Cause System Event: OS stop event OS graceful shutdown detected Information The operating system was shutdown/restarted normally. OEM Event data record (after OS graceful shutdown/restart event) Information Comment string accompanying an operating system shutdown/ restart.
Description Severity Cause not connected or is incorrectly connected. connected or is improperly connected. Information This event is generated when named cable or interconnect earlier cable or interconnect connection error was corrected. Description Severity Cause Failed was asserted Critical This event is generated when the sensor detects a failed or missing battery.
Power And Performance Events The power and performance events are used to detect degradation in system performance with change in power supply. Table 21. Power And Performance Events Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, degraded, was deasserted Normal This event is generated when system performance was restored.
Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was asserted Critical This event is generated when a change in power supply degrades system performance. System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was deasserted Normal This event is generated when system performance was restored. The system performance degraded.
Entity Presence Events The entity presence messages are used for detecting different hardware devices. Table 22. Entity Presence Events Description Severity Cause presence was asserted Information This event is generated when the device was detected. absent was asserted Critical This event is generated when the device was not detected. The is present. Information This event is generated when the device was detected. The is absent.
Description Severity Cause Hdwar version err: Version Change sensor, hardware incompatibility (BMC firmware and CPU mismatch) was asserted Critical This event is generated when the CPU and firmware are not compatible. Link Tuning: Version Change sensor, successful software or F/W change was deasserted Warning This event is generated when the link tuning setting for proper NIC operation fails to update.
Description Severity Cause The QuickPath Interconnect (QPI) width degraded. Warning This event is generated when the bus is not operating at maximum speed or width. The QuickPath Interconnect (QPI) width regained. Information This event is generated when the bus is operating at maximum speed or width. BIOS detected an error configuring the Intel Trusted Execution Technology (TXT). Critical This event is generated when TXT initialization failed.
