Users Guide

CAUTION: You may receive a warning message if you attempt to delete
the system or boot partition. However, this warning message is not
generated always. Ensure that you do not delete the system or boot
partition or other vital data when using this command.
Syntax
omconfig storage vdisk action=slowinit controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the
omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
NOTE: In some circumstances, you may receive a warning message if this
command deletes the system or boot partition. You can override this
warning by using the force=yes parameter. In this case, the syntax is as
follows:
omconfig storage vdisk action=slowinit controller=id
vdisk=id force=yes
Example to Slow initialize virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=slowinit controller=1 vdisk=4
Omconfig cancel initialize virtual disk
Description Cancels the initialization of a virtual disk.
Syntax
omconfig storage vdisk action=cancelinitialize controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the
omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Cancels the initialization of virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelinitialize controller=id
vdisk=id
Omconfig cancel background initialize
Description Cancels the background initialization process on a virtual disk.
Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id, where id is the controller ID and virtual disk ID as
reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
173