Connectivity Guide

Introduction

This reference guide provides information about Simple Network Management Protocol (SNMP)

Management Information Base (MIB) which are released with the current version of Dell iDRAC and

Chassis Management Controller.

Sections in this guide follow MIB groups and provide explanations and definitions for the terms used to

define MIB objects. All essential Simple Network Management Protocol (SNMP) terms are defined in this

guide. Some of the vocabulary may seem complex and unfamiliar to system administrators who are using

SNMP for the first time.

Supported SNMP Versions

iDRAC version SNMP Alerts / Traps SNMP Gets

iDRAC7 SNMP v1 ,v2, v3 v1,v2,v3

iDRAC8 SNMP v1,v2,v3 v1,v2,v3

NOTE: SNMP alerts and traps v3 is supported on iDRAC7 for firmware version 2.10.10.10 and later

systems.

Managed Object Used in This Document

The MIB is divided into several major groups. The following table provides information about the MIB

names, name of the agent that uses each MIB and the purpose:

MIB Name Agent / Hardware Supported Purpose of the MIB

10892.mib Server Administrator Provides the information about the systems

monitored by Server Administrator

instrumentation software. This is the primary

MIB for PowerEdge systems.

dcs3fru.mib Server Administrator Provides the information about the system

Field Replaceable Unit (FRU) to SNMP

management applications.

dcstorag.mib Server Administrator Storage

Management

Provides the information about the storage

hardware components and RAID

configurations monitored by Server

Administrator.

iDRAC-SMIv1.mib iDRAC7 and iDRAC 8 Provides information about the SNMP data

and traps supported by iDRAC7 and iDRAC8.

This is the SMIv1 version of the iDRAC MIB.