Connectivity Guide

Topic MIB Group Numbers
administrative users,
SNMP trap
destinations, modem
configuration for
dial-up networking,
dial-in configuration,
and dial-out
destinations
Dell Remote Access Controller Out-of-Band MIB
The Dell Remote Access Controller Out-of-Band MIB (filename DELL-RAC-MIB.txt) provides
management data that allows you to monitor the Chassis Management Controller. This MIB also contains
information on RAC legacy alerting. The following table describes each Dell RAC Out-of-Band group and
lists the MIB group number assigned to the MIB group. See the relevant section for more information
about the MIB objects defined in a MIB group.
Table 2. Dell RAC Out-of-Band MIB
Topics MIB Group Number
The Dell RAC Out-
of-Band MIB consists
of information for
the following groups:
• Product
Information
• Chassis Status
• Chassis Power
• CMC Power
Information
• CMC PSU
Information
• Chassis Alerts
• Legacy Alerting
2
Basic Terminology
It is important to have a good understanding of the key technical terms used in this guide. This guide
provides definitions for all essential terms used in describing the Server Administrator MIBs. For definitions
on all essential terms and acronyms, see the Glossary available on the Dell Support website at dell.com/
support/manuals.
Frequently Used Terms in Variable Names
The following terms are frequently used in the name of a MIB variable:
Capability refers to the actions an object can perform, or to actions that can be taken by the object. Hot-
pluggable is an example of a capability. If a card is hot-pluggable, it can be replaced while a system is
7