Reference Guide

Syntax DellUUIDType

Access Read-only

Table 10. UUID Value

Name

uUIDValue

Object ID 1.3.6.1.4.1.674.10892.1.300.20.1.4

Description Defines the value of the UUID for this chassis.

Syntax Octet String (SIZE[16])

Access Read-only Read-only

Section Organization

Sections in this reference guide are based on the Server Administrator MIBs, so the complexity of each

section depends on the complexity of each MIB group. The first section provides a high-level

introduction to the MIB group. If the group is defined by one or more tables, the second section lists

these tables. The third section documents the variables that comprise the group, and if applicable, the

variables that comprise the tables. The fourth section contains definitions for any Server Administrator-

specific variables that are used in the section. The following example shows the typical content of these

four sections:

1. BIOS Setup Control Group — This section explains the purpose of the MIB group and summarizes

the major features of the component groups.

2. BIOS Group Tables — If there is more than one SNMP table for a group, this section lists all of the

tables. For this BIOS group example, there are eight tables listed. In each section, double-clicking

any table on the list takes you to that table.

• BIOS Setup Control Table

• SCSI Control Table

• Parallel Port Control Table

• Serial Port Control Table

• USB Control Table

• IDE Control Table

• Diskette Control Table

• Network Interface Control Table

3. Variables that make up each table in the group — This section documents the variables for the eight

tables that comprise the BIOS group.

4. BIOS Variable Values — This section explains any Server Administrator-specific variables and data

types that are used in this section. In the BIOS group example, there are 17 unique, Server

Administrator-specific variable meanings. Information on each Server Administrator-specific variable

is presented in a formatted table.