Users Guide
Service Name Description Impact of Failure Recovery 
Mechanism
Severity
SNMP and CIM 
providers to 
perform a remote 
software update 
using Dell System 
Management 
Console and Dell 
IT Assistant (ITA).
individual Dell 
Update packages. 
Updates can still be 
performed using 
3rd party tools (for 
example, MSSMS, 
Altiris and Novell 
ZENworks).
NOTE: OMSA may send duplicate SNMP traps or log duplicate events in the Alert Log page or in the 
operating system log file. The duplicate traps and events are logged either when OMSA services are 
manually restarted or when the device sensor still indicates a non-normal state when OMSA 
services starts after an operating system reboot.
NOTE: Inventory Collector is required to update Dell consoles using Dell Update packages.
NOTE: Some of the Inventory Collector features are not supported on OMSA (64–bit).
Windows: SM SA 
Data Manager 
Linux: 
dsm_sa_datamgr
d (hosted under 
dataeng service) 
(This service runs 
on the managed 
system.)
Monitors the 
system, provides 
rapid access to 
detailed fault and 
performance 
information and 
allows remote 
administration of 
monitored 
systems, including 
shutdown, startup, 
and security.
Users are not able 
to configure/view 
the hardware level 
details on GUI/CLI 
without these 
services running.
Restart the service Critical
SM SA Event 
Manager 
(Windows) Linux: 
dsm_sa_eventmg
rd (hosted under 
dataeng service) 
(This service runs 
on the managed 
system.
Provides operating 
system and file 
event logging 
service for systems 
management and 
is also used by 
event log 
analyzers.
If this service is 
stopped, event 
logging features do 
not function 
properly
Restart the service Warning
Linux: 
dsm_sa_snmpd 
(hosted under 
dataeng service) 
(This service runs 
on the managed 
system.)
Data Engine Linux 
SNMP Interface
SNMP get/set /trap 
request is not 
functional from a 
management 
station.
Restart the service Critical
Windows: 
mr2kserv (This 
service runs on the 
managed system.)
The Storage 
Management 
Service provides 
storage 
management 
information and 
Users are unable to 
perform storage 
functions for all 
supported RAID 
and non-RAID 
controllers.
Restart the service Critical
79










