Users Guide

Table 92. omreport controller commands
Required command levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage
controller
Displays property information for all controllers attached to the
system.
controller=id, where id is the
controller number. For example,
controller=0
Displays the specified controller and all attached components
such as enclosures, virtual disks, physical disks, HHHL cards, and
so on.
controller=id info=foreignkeyids Displays the locked foreign configuration information for import
or clear operations.
controller=id info=pdslotreport
Displays the empty and occupied slot details of enclosures in the
controller.
NOTE: This command is not supported on Blackplane,
SCSI, and SWRAID controllers.
Omreport Enclosure Status
The following sections provide the omreport storage enclosure command syntax required to execute the enclosure commands. The
following table describes the syntax for the omreport Enclosure commands.
Table 93. omreport Enclosure Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
enclosure
Displays property information for all enclosures
attached to the system.
controller=id, where id is the controller number Displays all enclosures connected to the
controller.
controller=id enclosure=<ENCLOSUREID>, where
id is the controller number and
<ENCLOSUREID>is the enclosure ID. Example for
SCSI controllers: controller=0 enclosure=2.
Example for SAS controllers: controller=0
enclosure=1:2.
Displays the specified enclosure and its
components.
Omreport Temperature Probe Status
The following table describes the syntax for the omreport Probe commands:
Table 94. omreport Temperature Probe Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=temps where id is the controller
number and <ENCLOSUREID> is the
enclosure ID. Example for SCSI controllers:
controller=0 enclosure=2 info=temps.
Displays the temperature probes for the
specified enclosure.
130