Users Guide

Example
omconfig storage controller action=
setchangecontrollerproperties
allowrevertiblehotspare
andreplacemember=enabled controller=1
Example to
Example
Allows to enable, disable, or not to change the Non-RAID Hard
Disk Drives. This is applicable only to Disk Cache Policy.
omconfig storage controller action=
setchangecontrollerproperties controller=1
nrdiskcachepolicy=enabled
Omconfig Discard Preserved Cache
Table 170. Omconfig Discard Preserved Cache
Description Discards the preserved cache on the controller.
NOTE: To check if the controller has a preserved cache, type omreport storage controller
controller=id. If the system displays Preserved Cache=yes, it indicates the presence of the
preserved cache.
Syntax
omconfig storage controller action= discardpreservedcache controller=id
force=enabled | disabled
If you set force=enabled, the cache is discarded irrespective of whether the controller detects a foreign or an
offline virtual disk.
Example to Discard the preserved cache.
Example
omconfig storage controller action= discardpreservedcache controller=1
force=enabled
CAUTION: Discarding the preserved cache can result in data loss. It is recommended that you run this
command using the force=disabled option.
NOTE: If a foreign configuration is detected, then the preceding command using force=disabled
option fails. To avoid data loss, import the foreign configuration and flush the preserved cache to disk.
To discard preserved cache forcefully, either clear the foreign configuration and run the proceeding
command, or run the proceeding command using force=enabled option.
Omconfig Create Encryption Key
Table 171. Omconfig Create Encryption Key
Description Creates the encryption key for the controller.
Syntax
omconfig storage controller action= createsecuritykey controller=id keyid=<keyid
string> passphrase=<passphrase string>[escrow= yes] [filepath=<Absolute path to
the escrow file>]
Example to Create the encryption key for the controller.
Example
omconfig storage controller action= createsecuritykey controller=1
keyid=Dell_123 passphrase=Dell_123 escrow=yes filepath= C:/escrow.xml
NOTE: If you set escrow=yes, specify the escrow file path.
165