Users Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• rad: Maps the external serial
connector to the remote access
device.
attribute=fbr setting=9600 | 19200 | 57600 | 115200
• 9600: Sets the console redirection
failsafe baud rate to 9600 bits per
second.
• 19200: Sets the console redirection
failsafe baud rate to 19200 bits per
second.
• 57600: Sets the console redirection
failsafe baud rate to 57600 bits per
second.
• 115200: Sets the console redirection
failsafe baud rate to 115200 bits per
second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe filter
chipset option.
• disabled: Disables the probe filter
chipset option.
NOTE: Certain applications do not
function fully if you enable or
disable this option.
attribute=ide setting=on | off force=true
• on: Enables IDE.
• off: Disables IDE.
• force=true: Verification of setting
change.
attribute=idepridrv setting=off | auto
• off: Disables the device.
• auto: Detects and enables the device
automatically.
attribute=intrusion setting=enabled | disabled
• enabled: Enables the intrusion check
during system boot. If the system also
has bezel intrusion checking, then the
intrusion option checks for removal of
the bezel of the system.
• disabled: Disables the intrusion check
during system boot.
attribute=mouse setting=on | off
• on: Enables the mouse.
• off: Disables the mouse.
attribute=nic1 setting=enabled | enabledwithpxe |
disabled | enabledonly | enablednonepxe |
enabledwithiscsi
• enabled: Enables the first NIC during
system boot.
• enabledwithpxe: Enables the first NIC
during system boot (with PXE on if
the system has PXE).
• disabled: Disables the first NIC during
system boot.
• enabledonly: Enables the first NIC
during system boot (with PXE off if
the system has PXE).
• enablednonepxe: Enables the first NIC
during system boot (with PXE off if
the system has PXE).
61