Users Guide

Group name=value pair 1 attribute= name=value pair 2 setting=

attribute=SataPortADriveType -

SataPortJDriveType

setting=<string>

attribute=SataPortAModel -

SataPortJModel

setting=<string>

attribute=SecurityFreezeLock setting=Enabled | Disabled

attribute=WriteCache setting=Enabled | Disabled

Serial Communication attribute=ConTermType setting=Vt100Vt220 | Ansi

attribute=ExtSerialConnector setting=Serial1 | Serial2 |

RemoteAccDevice

attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600

attribute=RedirAfterBoot setting=Enabled | Disabled

attribute=SerialComm setting=OnNoConRedir |

OnConRedirCom1 | OnConRedirCom2 |

Off

attribute=SerialPortAddress setting=Serial1Com1Serial2Com2 |

Serial1Com2Serial2Com1 | Com1 | Com2

Slot Disablement attribute=Slotn setting=Enabled | Disabled |

BootDriverDisabled

System Information attribute=SysMfrContactInfo setting=<string>

attribute=SystemBiosVersion setting=<string>

attribute=SystemManufacturer setting=<string>

attribute=SystemModelName setting=<string>

attribute=SystemServiceTag setting=<string>

attribute=SystemMeVersion

NOTE: The option is supported

only on 13G and later systems.

setting=<string>

attribute=UefiComplianceVersion

NOTE: The option is supported

only on 13G and later systems.

setting=<string>

attribute=SystemCpldVersion setting=<string>

System Profile Settings attribute=MemFrequency setting=MaxPerf |1866MHz | 1600MHz |

1333MHz |1067MHz | 800MHz |

MaxReliability

attribute=MemPatrolScrub setting=Standard | Extended | Disabled

attribute=MemRefreshRate setting=1x | 2x

attribute=MemVolt

setting=AutoVolt | Volt15V | Volt135V

NOTE: Volt15V represents 1.5 Volt

and Volt135V represents 1.35 Volt

attribute=ProcC1E setting=Enabled | Disabled