Users Guide

name=value pair 1 name=value pair 2 Description

NOTE: These options are applicable

only when a custom profile is

selected.

memorypowermode=min | 800 | 1067 |

1333 | max

min: Sets the mode to minimum power

utilization.

800 | 1067 | 1333: Set the mode to 800,

1067, or 1333 MHz.

max: Sets the mode to maximum

performance.

NOTE: These options are applicable

only when a custom profile is

selected.

fanmode=min | max

min: Sets the fanmode to minimum power

utilization.

max: Sets the fanmode to maximum

power utilization.

NOTE: These options are applicable

only when a custom profile is

selected.

NOTE: Reboot the system for the power profiles setup options to take effect.

Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring

Use the omconfig chassis pwrmonitoring or omconfig mainsystem pwrmonitoring command to configure power consumption

information.

The following table displays the valid parameters for the command:

Table 51. Valid Parameters Of Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring

name=value pair 1 name=value pair 2 Description

index=<n> NA Number of the probe or probe index

(must specify).

config=probe warnthresh=settodefault Sets the minimum and maximum warning

thresholds values to default.

warnthresh=<n > Sets a value for the warning threshold.

unit=watt | btuphr

watt: Displays the unit in Watts.

btuphr: Displays the unit in BTU/hr.

config=resetreading type=energy | peakpower

energy: Resets the system energy

reading.

peakpower: Resets the system peak

power.

NOTE: This command is applicable only on selected Dell 10G systems that support PMBus.