Reference Guide

TriggerType Indicates if edge (value=4) or level

triggered (value=3) interrupts occur.

1- Other

2- Unknown

3- Level

4- Edge

uint16

Shareable Indicates if the IRQ can be shared. A value

of TRUE indicates that the IRQ can be

shared.

Boolean

Hardware Indicates if the interrupt is hardware- or

software-based. (A value of TRUE

indicates that the interrupt is hardware

based.) On a personal computer, a

hardware IRQ is a physical wire to a

programmable interrupt controller (PIC)

chip set through which the

microprocessor can be notified of time

critical events. Some IRQ lines are

reserved for standard devices such as the

keyboard, diskette drive, and the system

clock. A software interrupt is a

programmatic mechanism to allow an

application to get the attention of the

processor.

Boolean

CIM_MemoryMappedIO

The CIM_MemoryMappedIO class described in properties Table below addresses both memory and port I/O resources for personal

computer architecture memory mapped I/O.

Table 50. CIM_MemoryMappedIO Properties

Class Name:

CIM_MemoryMappedIO

Parent Class:

CIM_SystemResource

Property Description Data Type

CSCreationClassName See Common Properties of Classes string

CSName See Common Properties of Classes string

CreationClassName See Common Properties of Classes string

StartingAddress Identifies the starting address of memory

mapped I/O.

uint64

EndingAddress Identifies the ending address of memory

mapped I/O.

uint64