CLI Guide

Table 102. Omreport Global Information Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage globalinfo
Displays whether smart thermal shutdown is
enabled or disabled. For more information, see
Omcong Global Enable Smart Thermal
Shutdown.
Displays the hot spare protection policy that
you have set. For more information on setting
hot spare protection policy, see the Dell EMC
OpenManage Server Administrator Storage
Management User’s Guide at dell.com/
support/manuals.
Omreport Connector Status
The following table describes the syntax for the omreport Connector commands:
Table 103. omreport Connector Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage connector
Displays all connectors present on all controllers on
the system.
NOTE: This command works only when
the controller ID is specied.
controller=id, where id is the controller
number. For example: controller=0
Displays the connectors on the specied controller.
controller=id connector=id, where id is
the connector number. For example,
connector=0
Displays the specied connector.
NOTE: When the connectors are
connected to the enclosure in redundant
path mode, the Name of the connector is
displayed as Logical Connector.
Omreport Cachecade Status
The following table describes the syntax for the omreport Cachecade commands
Table 104. omreport Cachecade Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage cachecade Displays property information for all cachecades
on all controllers.
controller=id, where id is the controller number.
For example, controller=0.
Displays all cachecades on the specied
controller.
controller=id cachecade=id, where id is the
controller number and the cachecade number.
For example, controller=0 cachecade=1.
Displays the specied cachecade on the
controller.
142 Omreport storage commands