CLI Guide

Omcong Assign Global Hot Spare
Table 118. omcong Assign Global Hot Spare
Description
Assigns a physical disk as a global hot spare.
Syntax
omconfig storage pdisk
action=assignglobalhotspare controller=id
pdisk=<PDISKID> assign=yes, where id is the controller ID.
The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Assign physical disk 3 on connector 0 of controller 1 as a global hot
spare. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=assignglobalhotspare controller=1
pdisk=0:3 assign=yes
Example for SAS controllers
omconfig storage pdisk
action=assignglobalhotspare controller=1
pdisk=0:2:3 assign=yes
Omcong Available Spare
Table 119.
omcong Available Spare
Description
Assigns a physical disk as a global hot spare.
Syntax
omconfig storage globalinfo
action=setavailablesparethreshold type=<pcissd>
warning_threshold=<1-99>, critical_threshold=<1-99>
where id is the controller ID. The
<pcissd> variable species the
PCISSD.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Set available spare threshold on supported NVMe PCIe SSD.
Example for PCIe SSD
omconfig storage globalinfo
action=setavailablesparethreshold type=pciessd
warning_threshold=20
150 Omcong storage commands