Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 9.1.2
61626364656667686970
• Enable or disable power button control features if the system conguration permits
Use the omcong chassis -? or omcong mainsystem -? command to view a list of all omcong chassis or omcong mainsystem
commands.
Omcong Chassis Biossetup Or Omcong Mainsystem
Biossetup
Use the omcong chassis biossetup or omcong mainsystem biossetup command to congure system BIOS settings that are normally
available only in the BIOS setup boot time settings of the system.
CAUTION: Changing certain BIOS setup options may disable the system or require you to reinstall the operating system.
NOTE: Reboot the system for the BIOS setup options to take eect.
NOTE: Not all BIOS setup options are available on every system.
NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, you cannot congure the BIOS settings using omcong
command.
BIOS setup settings on systems prior to PowerEdge 12G systems
The following table displays the name=value pairs that you can use with omcong chassis biossetup or omcong mainsystem biossetup
command on systems prior to PowerEdge 12G systems.
Table 45. BIOS Setup Settings on systems prior to PowerEdge 12G systems
name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=acpwrrecovery setting=o | last| on
• o: System is turned o.
• last: System returns to the previous
state.
• on: System is turned on.
delay=random | immediate | timedelay
<value>
• random: System is turned on with
random delay.
• immediate: System returns to previous
state immediately.
• timedelay <
value
>: System is turned on
based on the user specied time delay.
attribute=bezel setting=enabled | disabled
• enabled: Enables the bezel removal
intrusion check during system boot.
• disabled: Disables the bezel removal
intrusion check during system boot.
attribute=bootsequence setting=disketterst | hdonly | devicelist |
cdromrst | opticaldrive
Instructs the BIOS which device is used to
boot the system, and the order in which the
boot routine checks each device.
62 Omcong Managing Components Using The Instrumentation Service