Reference Guide

Parent Class: CIM_NumericSensor
Property Description Data Type
SensorType See Common Properties of Classes uint16
UnitModier See Common Properties of Classes sint32
CurrentReading See Common Properties of Classes sint32
IsLinear See Common Properties of Classes Boolean
LowerThresholdNonCritical See Common Properties of Classes sint32
UpperThresholdNonCritical See Common Properties of Classes sint32
CIM_WatchDog
The CIM_WatchDog class described in Table below represents a timer that is implemented in system hardware. The watchdog feature
allows the hardware to monitor the state of the operating system, BIOS, or a software component installed on the system. If the monitored
component fails to rearm the timer before its expiration, the hardware assumes that the system is in a critical state and could reset the
system. This feature can also be used as an application watchdog timer for a mission-critical application. In this case, the application would
assume responsibility for rearming the timer before expiration.
Table 27. CIM_WatchDog Properties
Class Name:
CIM_WatchDog
Parent Class:
CIM_LogicalDevice
Property Description Data Type
MonitoredEntity Indicates the entity that is currently being
monitored by the watchdog feature. This
property is used to identify the module that is
responsible for rearming the watchdog at
periodic intervals. Values for the
MonitoredEntity property are:
1 - Unknown
2 - Other
3 - Operating System
uint16
MonitoredEntity Description A string describing additional textual
information about the monitored entity.
string
TimeoutInterval Indicates the time-out interval used by the
watchdog, in microseconds.
uint32
TimerResolution Indicates the resolution of the watchdog
timer. For example, if this value is 100, then
uint32
CIM_LogicalElement 35