CLI Guide

name=value pair 1 name=value pair 2 Description
NOTE: If an incorrect cipher value is
set and the connection service fails to
start, use the CLI command prompt
or manually set the valid ciphers and
restart the connection service.
attribute=<sslprotocol> setting=<valid sslprotocol values are
TLSv1.1| TLSv1.2| TLSv1.1, TLSv1.2|
Allows you to set the web server SSL
protocols conguration from the valid values.
The changes to take eect after web server
restart.
attribute=<port> setting=<valid port value>
Sets the number of secure ports that you
want Server Administrator to use. The port
value range from 1024 to 65535. The default
port for Server Administrator is 1311.
attribute=<ipaddress> setting=<valid Binding IPAddress value>
Sets by default the web server to incoming
browser requests on ALL IP addresses.
However, for increased security you can
specify a single IP address or, ALL IP
addresses. An error message is displayed on
an invalid entry of the congurable Bind List
of IP Address. For the changes to take eect,
restart the web server.
attribute=<sessiontimeout> setting=<valid Session Timeout value
between 1– 30>
Allows Server Administrator to time-out if
there is no user input for a specied number
of minutes. Users whose sessions time-out
must log in again to continue.
An example command to set the URL launch point is as follows:
omconfig preferences webserver attribute=seturl host=<name, ip, fqdn> port=<number>
The host input must contain a valid IPv4 or IPv6 address, or a valid host name.
An example command to set the signing algorithm value is as follows:
omconfig preferences webserver attribute=signalgorithm setting=MD5
An example command to set the JRE versions is as follows:
omconfig preferences webserver attribute=setjre jreversion=<bundled | value>
An example command to export a Certicate Signing Request (CSR) is as follows:
omconfig preferences webserver attribute=exportcsr
The command creates a le of the format xxxx.csr in the <Server Administrator installation directory>\apache-tomcat\temp folder.
An example command to create a web server certicate is as follows:
omconfig preferences webserver attribute=gennewcert cn=HostName org=dell ou=ESG
location=RoundRock state=TX country=US validity=300 keysize=2048 algorithm=SHA512
webserverrestart=true
An example command to upload a certicate on the Server Administrator web server is as follows:
omconfig preferences webserver attribute=uploadcert certfile=C:/xyz.crt webserverrestart=true
Omcong
Managing Components Using The Instrumentation Service 101