CLI Guide

Command Level
1
Command Level 2 Command Level
3
Name= Value Pair
1
Name= Value Pair 2 Description
startdate=<startdate> Date the maintenance
begins.
restrictions=<string> Activities not covered by the
maintenance contract.
Example command for adding maintenance information
To provide a value for a maintenance parameter, type a command of the form: omcong system assetinfo info=maintenance <name=value
pair 2> or omcong system assetinfo info=maintenance <name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance startdate=012504
or
omconfig servermodule assetinfo info=maintenance startdate=012504
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Commands For Adding Acquisition
Information.
Adding outsource information
Outsourcing is the practice of contracting with another business to maintain the system in good working order. The following table displays
the valid parameters for adding outsource information.
Table 83. Valid Parameters Of
omcong system assetinfo info=outsource Or omcong servermodule assetinfo info=outsource
Command
Level 1
Command Level
2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=outsource levels=<n> Levels of service that the
provider oers.
problemcomponent=<component> System component that
requires maintenance.
providerfee=<providerfee> Amount of money
charged for maintenance.
servicefee=<servicefee> Amount of money
charged for service.
signauth=<name> Person who signed or
authorized the service.
128 Omcong System Or Servermodule Assetinfo Editing Cost Of Ownership Values