CLI Guide

Omcong Prepare To Remove Physical Disk
Table 112. omcong Prepare To Remove Physical Disk
Description
Prepares a physical disk for removal.
Syntax
omconfig storage pdisk action=remove
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Prepares physical disk 3 on connector 0 of controller 1 for removal.
On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=remove
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=remove
controller=1 pdisk=0:2:3
Omcong Instant Erase Secured Physical Disk
Table 113.
omcong Instant Erase Secured Physical Disk
Description Erases the given encrypted disk.
NOTE: This command is applicable only on Micron
devices.
Syntax
omconfig storage pdisk
action=instantsecureerase controller=id
pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Erase physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=instantsecureerase controller=1
pdisk=0:3
Example for SAS controllers
omconfig storage pdisk
action=instantsecureerase controller=1
pdisk=0:2:3
148 Omcong storage commands