CLI Guide

The following table lists the parameters you can use with this command. For example, to set the message format to traditional use the
following command:
Table 60. Valid Parameters Of Conguring Preferences Messages
name=value pair 1 name=value pair 2 Description
attribute=format setting=traditional | enhanced
traditional: Sets the alert message to traditional format.
enhanced: Sets the alert message to Enhanced Event Messaging
format. This is similar to the format available in iDRAC7.
omconfig preferences messages format=traditional
Omcong Preferences Useraccess
Depending on the policies of your organization, you may want to restrict the access that some user levels have to Server Administrator. The
omcong preferences useraccess command allows you to grant or withhold the right of users and power users to access Server
Administrator. The following table displays the valid parameters for the command:
Table 61. Enabling User Access For Administrators, Power Users, And Users
Command Result Description
omcong preferences useraccess
enable=user
Grants Server Administrator access to
Users, Power Users, and Administrators.
Least restrictive form of user access.
omcong preferences useraccess
enable=poweruser
Grants Server Administrator access to
Power Users and Administrators.
Excludes user level access only.
omcong preferences useraccess
enable=admin
Grants Server Administrator access to
Administrators only.
Most restrictive form of user access.
Omcong Preferences Logging
Use the omcong preferences logging command for ltering the OS logs using the attributes.
Table 62. Valid Parameters Of
Omcong Preferences Logging
name=value pair 1 name=value pair 2 Description
attribute=osloglter logcrit=true|false logwarn=true|false
loginfo=true|false
Specify at least one of the three attributes
(critical, warning or informational), else an
error message is displayed. A command log
entry is created after running the omcong
command. The OS logging settings persist on
Server Administrator restart and upgrade.
omconfig preferences logging
attribute=oslogfilter
logcrit=<true|false>
logwarn=<true|false>
loginfo=<true|false>
Omcong Managing Components Using The Instrumentation Service 97