CLI Guide

name=value pair 1 name=value pair 2 Description

NOTE: The OS logging lter

command is applicable when the OS

logging lter component is installed.

attribute=archiveesmlog setting=Enable|Disable

Enabling the command allows you to create

an automatic backup of ESM Logs. After the

backup is created, ESM logs of the Server

Administrator and the SEL entries of

iDRAC/BMC are cleared. The process is

repeated whenever the logs are full.

The backup les are:

Windows: <Install_root>\omsa\log

\omsellog.xml

Linux and ESXi: <Install_root>/var/log/

openmanage/omsellog.xml

NOTE: This command is applicable

only on 10th and 11th generation of

PowerEdge servers. On Dell’s 12th

generation of PowerEdge servers and

later, iDRAC provides capability of

automatic clear of log entries and le

backup. Only latest version of the

backup XML le is available in the

mentioned locations.

attribute=logallsensors setting=Enable|Disable Enabling the command allows you to log all

unmonitored ESM sensor events in to Alert

log, OS log, and generates the SNMP traps.

An example command set only to remove the critical severities is as follows:

omconfig preferences logging attribute=oslogfilter logcrit=false

An example command set to enable the automatic backup of ESM logs.

omconfig preferences logging attribute=archiveesmlog setting=Enable

An example command set to enable the Log All ESM Sensor Events.

omconfig preferences logging attribute=logallsensors setting=Enable

Omcong preferences webserver

Use the omcong preferences webserver command to set the encryption levels of the Server Administrator web server, congure the URL

launch point in the Server Administrator web server environment, and to set the JRE version for the Server Administrator.

The following table displays the name=value pairs you can use with this command:

Omcong Managing Components Using The Instrumentation Service