Install Guide

NOTE: To congure user authorization — For WinRM and WMI Servers, you must login with administrator privileges. - For
Windows Server operating systems, you must login as a built-in Administrator, Domain Administrator, or user who is a part of
Domain Admins and Domain Users group.
NOTE: The administrator is congured by default.
WinRM
To congure user authorization for WinRM servers:
1
Click Start > Run.
2
Type winrm configsddl and click OK.
If you are using WinRM 2.0, type winrm configsddl default.
3 Click Add and add the required users or groups (local/domain) to the list.
4 Provide the appropriate permission(s) to the respective users and click OK.
WMI
To congure user authorization for WMI servers:
1 Click Start > Run.
2 Type wmimgmt.msc, and then click OK.
The Windows Management Infrastructure (WMI) screen is displayed.
3 Right-click the WMI Control (Local) node in the left pane, and then click Properties.
The WMI Control (Local) Properties screen is displayed.
4 Click Security and expand the Root node in the namespace tree.
5 Navigate to Root > DCIM > sysman.
6 Click Security.
The Security screen is displayed.
7 Click Add to add the required users or groups (local/domain) to the list.
8 Provide the appropriate permission(s) to the respective users, and then click OK.
9 Click OK.
10 Close the Windows Management Infrastructure (WMI) screen.
Conguring The Windows Firewall For WinRM
To congure the Windows Firewall for WinRM:
1 Open Control Panel.
2 Click Windows Firewall.
3 Click Exceptions tab.
4 Select Windows Remote Management check box. If you do not see the check box, click Add Program to add Windows Remote
Management.
Conguring The Envelope Size For WinRM
To congure the envelope size for WinRM:
NOTE
: On WinRM version 2.0, enable the compatibility mode for WinRM version 2.0 to use port 443. WinRM version 2.0 uses
port 5986 by default. To enable the compatibility mode, type the following command:
winrm s winrm/config/Service @{EnableCompatibilityHttpsListener="true"}
1
Open a command prompt.
2 Type winrm g winrm/config.
18
Preinstallation Setup