Users Guide

Property Denition

Firmware Version Displays the version of the rmware available on the controller.

Minimum Required Firmware Version Displays the minimum rmware version that is required by Storage

Management. This property is displayed only if the controller

rmware does not meet the minimum requirement.

Driver Version Displays the version of the drivers installed on the controller.

Minimum Required Driver Version Displays the minimum driver version that is required by Storage

Management. This property is displayed only if the controller driver

does not meet the minimum requirement.

Number of Connector Displays the number of connectors available on the controller. Each

connector can be attached to physical disks or an enclosure.

Depending on the controller type, the connector can be either a

SCSI channel or a SAS port.

Rebuild Rate The rebuild rate is the percentage of the resources available on the

system dedicated to rebuild a failed disk when a rebuild is

necessary. For more information on rebuild rate, see Setting The

Rebuild Rate.

Alarm State Displays whether the alarm on the controller is enabled or disabled.

Cluster Mode Indicates whether the controller is part of a cluster conguration.

Storage Components

For information on attached controllers, see Controllers.

Storage Information And Global Tasks