CLI Guide

Example command for adding outsource information
To provide a value for an outsource parameter, type a command of the form: omcong system assetinfo info=outsource <name=value pair
2> or omcong servermodule assetinfo info=outsource <name=value pair 2>. For example, type:
omconfig system assetinfo info=outsource providerfee=75
or
omconfig servermodule assetinfo info=outsource providerfee=75
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding owner information
The owner is the party that holds legal property title to the system. The following table displays the valid parameters for adding owner
information.
Table 84. Valid Parameters Of
omcong system assetinfo info=owner Or omcong servermodule assetinfo info=owner
Command
Level 1
Command Level
2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=owner insuranceco=<company> Name of the insurance
company that insures the
system.
ownername=<business> Business entity that owns the
system.
type=owned | leased | rented Whether the user of the
system owns, leases, or rents
the system.
Example command for adding owner information
To provide a value for an owner parameter, type a command of the form omcong system assetinfo info=owner <name=value pair 2> or
omcong servermodule assetinfo info=owner <name=value pair 2>. For example, type:
omconfig system assetinfo info=owner type=rented
or
omconfig servermodule assetinfo info=owner type=rented
The following message is displayed:
Asset information set successfully.
Omcong
System Or Servermodule Assetinfo Editing Cost Of Ownership Values 129