CLI Guide

The index parameter is optional. If you do not specify the index, Server Administrator displays information for all memory modules on
the system as follows:
The following is an example output:
Table 19. Output
Memory Information
Health : Ok
Attributes of Memory Array(s)
Location : System Board or Motherboard
Use : System memory
Installed Capacity : 65536 MB
Maximum Capacity : 786432 MB
Slots Available : 24
Slots Used : 8
Error Correction : Multibit ECC
Total of Memory Array(s)
Total Installed Capacity : 65536 MB
Total Installed Capacity Available to the OS : 64386 MB
Total Maximum Capacity : 786432 MB
Details of Memory Array 1
Index : 0
Status : Ok
Status : Ok
Status : Ok
Connector Name : DIMM_A1
Type : DDR3 - Synchronous Registered (Buffered)
Size : 8192 MB
Index : 1
Status : Ok
Connector Name : DIMM_A2
Type : DDR3 - Synchronous Registered (Buffered)
Size : 8192 MB
Index : 2
Status : Ok
Connector Name : DIMM_A3
Type : DDR3 - Synchronous Registered (Buffered)
Size : 8192 MB
Index : 3
Status : Ok
Connector Name : DIMM_A4
omreport Viewing System Status Using The Instrumentation Service 29