CLI Guide

name=value pair 1
config=
name=value pair 2 Description
vlanenable=true | false
true: Enables the virtual LAN identification.
false: Disables the virtual LAN identification.
vlanid=number
number: Virtual LAN identification in the range of 1 to 4094.
vlanpriority=number
number: Priority of virtual LAN identification in the range of 0
to 7.
privilegelevel=administrator | operator |
user
administrator: Sets the maximum privilege level that is
accepted on a LAN channel, to Administrator.
operator: Sets the maximum privilege level that is accepted
on a LAN channel, to Operator.
user: Sets the maximum privilege level that is accepted on a
LAN channel, to User.
encryptkey=text confirmencryptkey=text text: Text used for encryption and confirmation of encryption.
prefdnsserverv6=<value> Validates the preferred DNS server for configuration.
config=serial
baudrate=9600 | 19200 | 38400 | 57600 |
115200
9600: Sets the connection speed to 9600 bits per second.
19200: Sets the connection speed to 19200 bits per second.
38400: Sets the volatile and non-volatile connection speed to
38400 bits per second.
57600: Sets the volatile and non-volatile connection speed to
57600 bits per second.
115200: Sets the volatile and non-volatile connection speed to
115200 bits per second.
flowcontrol=none | rtscts
none: No control over the flow of communication through the
serial port.
rtscts: RTS is ready to send and CTS is clear to send.
mode=directbasic | directterminal |
directbasicterminal | modembasic |
modemterminal | modembasicterminal
directbasic: Type of messaging used for IPMI messaging
over a serial connection.
directterminal: Type of messaging that uses printable ASCII
characters and allows a limited number of text commands
over a serial connection.
directbasicterminal: Both basic and terminal mode
messaging over a serial connection.
modembasic: Type of messaging used for IPMI messaging
over a modem.
modemterminal: Type of messaging that uses printable
ASCII characters and allows a limited number of text
commands over a modem.
modembasicterminal: Both basic and terminal messaging
over a modem.
NOTE: All commands may not be supported on the
system.
privilegelevel=administrator | operator |
user
administrator: Sets the maximum privilege level that are
accepted on a serial connection, to Administrator.
operator: Sets the maximum privilege level that are accepted
on a serial connection, to Operator.
82 Omconfig Managing Components Using The Instrumentation Service