Reference Guide
Property Description Data Type
RedundancyStatus Provides information on the state of the
redundancy group. Values for the
RedundancyStatus property are as follows:
0- Unknown
1- Other
2- Fully redundant. Fully redundant - all of
the congured redundancy is still available.
3 - Degraded redundancy. Degraded
redundancy - that some failures have been
experienced but some reduced amount of
redundancy is still available.
4 - Redundancy lost. Redundancy lost - that
a sucient number of failures have occurred
so that no redundancy is available and the
next failure experienced causes overall
failure.
uint16
CIM_ExtraCapacityGroup
The CIM_ExtraCapacityGroup class described in below properties Table applies to systems that have more capability and components than
are required for normal operation, for example, systems that have extra fans or power supplies.
The following table describes the property, description, and data type details for the CIM ExtraCapacityGroup.
Class Name: CIM_ExtraCapacityGroup
Parent Class: CIM_RedundancyGroup
Table 53. CIM_ExtraCapacityGroup Properties
Property Description Data Type
MinNumberNeeded Species the smallest number of elements
that must be operational in order to have
redundancy. For example, in an N+1
redundancy relationship, the
MinNumberNeeded property should be set
to N.
uint32
CIM_LogicalElement 63