Users Guide

A Corrupt Disk Or Drive Message Suggests Running
Autocheck During A Reboot
You can ignore the message and perform autocheck. The reboot completes after autocheck is completed. Depending on the size of your
system, it may take about 10 minutes.
Erroneous Status And Error Messages After A Windows
Hibernation
Activating the Windows hibernation feature may cause Storage Management to display erroneous status information and error messages.
This problem resolves when the Windows operating system recovers from hibernation.
Storage Management May Delay Before Updating Temperature
Probe Status
In order to display the enclosure temperature and temperature probe status, Storage Management polls the enclosure rmware at regular
intervals to obtain temperature and status information. On some enclosures, there is a short delay before the enclosure rmware reports
the current temperature and temperature probe status. This may cause a delay in displaying the correct temperature and temperature
probe status.
Storage Management May Delay Displaying Storage Devices
After Reboot
Storage Management requires time after a reboot to nd and inventory all attached storage devices. You may experience a delay in storage
controllers being displayed until this operation has completed.
You Are Unable To Log Into A Remote System
Ensure that you have connected to the system with administrator privileges and have provided the correct login details. The remote system
may be turned o or there may be network problems.
Cannot Connect To Remote System Running Microsoft
Windows Server 2003
When connecting to a remote system running Windows Server 2003, log in to the remote system using an account that has administrator
privileges. By default, Windows Server 2003 does not allow anonymous (null) connections to access the SAM user accounts. Therefore, if
you are attempting to connect using an account that has a blank or null password, the connection may fail.
156
Troubleshooting