Users Guide
NOTE: You may not receive SMART alerts when the I/O of a controller is paused.
Using Alarms To Detect Failures
Certain storage components have alarms which when enabled, alert you when the component fails.
Time Delay In Displaying Conguration Changes
When you change the storage conguration, Storage Management quickly generates SNMP traps in response to the conguration
changes. The Storage Management, Management Information Base (MIB) is also updated to reect storage conguration changes.
However, it may take up to ve minutes to update the MIB with the most recent storage conguration. For this reason, there is a time delay
of up to ve minutes between the receipt of an SNMP trap and the ability to identify the conguration changes by querying the Storage
Management MIB. This time delay is notable when creating a new virtual disk or performing an unmirror or split mirror on a RAID 1-
concatenated virtual disk.
30 Quick Access To Storage Status And Tasks