CLI Guide

Omreport controller status
The following table describes the syntax for the omreport Controller commands.
Table 95. omreport controller commands
Required command levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage controller Displays property information for all controllers attached to the
system.
controller=id, where id is the
controller number. For example,
controller=0
Displays the specied controller and all attached components such
as enclosures, virtual disks, physical disks, HHHL cards, and so on.
controller=id info=foreignkeyids Displays the locked foreign conguration information for import or
clear operations.
controller=id info=pdslotreport
Displays the empty and occupied slot details of enclosures in the
controller.
NOTE: This command is not supported on Blackplane,
SCSI, and SWRAID controllers.
Omreport Enclosure Status
The following sections provide the omreport storage enclosure command syntax required to execute the enclosure commands. The
following table describes the syntax for the omreport Enclosure commands.
Table 96. omreport Enclosure Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage enclosure Displays property information for all enclosures
attached to the system.
controller=id, where id is the controller number Displays all enclosures connected to the controller.
controller=id enclosure=<ENCLOSUREID>, where id
is the controller number and <ENCLOSUREID>is the
enclosure ID. Example for SCSI controllers:
controller=0 enclosure=2. Example for SAS
controllers: controller=0 enclosure=1:2.
Displays the specied enclosure and its components.
Omreport Temperature Probe Status
The following table describes the syntax for the omreport Probe commands:
134
Omreport storage commands