CLI Guide

• Omcong cachecade commands
• Omcong NVMe adapter conguration commands
Omcong Physical Disk Commands
The following sections provide the omcong command syntax required to run physical disk tasks:
Table 109. omcong Physical Disk Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omcong storage pdisk action=blink controller=id pdisk=<PDISKID>
action=unblink controller=id pdisk=<PDISKID>
action=remove controller=id pdisk=<PDISKID>
action=instantsecureerase controller=id pdisk=<PDISKID>
action=cryptographicerase controller=id pdisk=<PDISKID>
action=initialize controller=id pdisk=<PDISKID>
action=oine controller=id pdisk=<PDISKID>
action=online controller=id pdisk=<PDISKID>
action=assignglobalhotspare controller=id pdisk=<PDISKID> assign=<yes | no>
action=rebuild controller=id pdisk=<PDISKID>
action=cancelrebuild controller=id pdisk=<PDISKID>
action=cancelreplacemember controller=id pdisk=<PDISKID>
action=clear controller=id pdisk=<PDISKID>
action=cancelclear controller=id pdisk=<PDISKID>
action=enabledevicewritecache controller=id pdisk=<PDISKID>
action=disabledevicewritecache controller=id pdisk=<PDISKID>
action=exportlog controller=id pdisk=<PDISKID> [lename=<lename>], the lename
mentioned here is optional.
action=convertraidtononraid controller=id pdisk=<PDISKID>
action=convertnonraidtoraid controller=id pdisk=<PDISKID>
action=setarraydiskcache controller=id pdisk=<PDISKID>
Omcong Blink Physical Disk
Table 110.
omcong Blink Physical Disk
Description
Blinks the light (light emitting diode or LED display) on one or more
physical disks attached to a controller.
Syntax
omconfig storage pdisk action=blink
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
Omcong storage commands 141