CLI Guide

Read Policy readpolicy=ra | ara | nra | rc | nrc Parameter Specication
Read cache readpolicy=rc
No read cache readpolicy=nrc
writepolicy=<wb | wt | wc | nwc>]
Dierent controllers support dierent write policies. The following table displays how to specify the writepolicy=<wb | wt | wc | nwc | fwb>
parameter for each of the write policies.
Table 164. Write Policy Parameters
Write Policy writepolicy=wb | wt | wc | fwb | nwc Parameter Specication
Write-back cache writepolicy=wb
Write-through cache writepolicy=wt
Write cache writepolicy=wc
Force write back writepolicy=fwb
No write cache writepolicy=nwc
Controller
Controller=id - Specify the controller ID as reported by the omreport storage controller command. For example,controller=2
Raid
Use the raid=<c| r0 | r1| r1c | r5 | r6 | r10 | r50 | r60> parameter to specify a RAID level for a virtual disk. Dierent controllers support
dierent RAID levels. For more information about RAID levels a controller supports and for general information about RAID levels, see the
Dell EMC OpenManage Online Help. The following table displays how to specify the raid=n parameter for each RAID level.
Table 165. Raid level and parameter
specication
RAID level raid=n parameter specication
RAID-0 raid=r0
RAID-1 raid=r1
RAID-5 raid=r5
RAID-6 raid=r6
RAID-10 raid=r10
RAID-50 raid=r50
RAID-60 raid=r60
size parameter
The following table displays how to specify the size=<number | max | min>
168
Omcong storage commands