CLI Guide

Omcong Delete Cachecade
Table 220. Omcong Delete Cachecade
Description Deletes a cachecade.
Syntax
omconfig storage cachecade action=deletecachecade controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display the controller IDs
and then type
omreport storage cachecade controller=ID to display the IDs for the
cachecades of the controller.
In some circumstances, you may receive a warning message. You can override this warning by using the
force=yes parameter. In this case, the syntax is as follows:
omconfig storage cachecade action=deletecachecade controller=id
cachecade=id force=yes
Example to Delete cachecade 4 on controller 1.
Example
omconfig storage cachecade action=deletecachecade controller=1
cachecade=4
Omcong Resize Cachecade
Table 221.
Omcong Resize Cachecade
Description Resizes a cachecade by adding or removing physical disks.
Syntax
omconfig storage cachecade action=resize controller=id cachecade=id
pdisk=<PDISKID>, where id is the controller ID and the cachecade ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display the controller IDs
and then type
omreport storage cachecade controller=ID to display the IDs for the
cachecades of the controller.
Example to Resize cachecade 4, use physical disks 0 through 3 on connector 0 of controller 1.
Example for SAS controllers
omconfig storage cachecade action=resize controller=1 cachecade=4 pdisk=
0:2:0,0:2:1,0:2:2,0:2:3
Example for SCSI, SATA,
and ATA controllers
omconfig storage cachecade action=resize controller=1 cachecade=4
pdisk=0:0,0:1,0:2,0:3
Omcong Rename Cachecade
Table 222.
Omcong Rename Cachecade
Description Renames a cachecade.
Syntax
omconfig storage cachecade action=rename controller=id cachecade=id
name=<string>, where id is the controller ID and the cachecade ID as reported by the omreport
Omcong storage commands 189