CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=PowerCycleRequest setting=None | VirtualAC
Network Settings
NOTE: The option is supported only
on 13G and later systems.
attribute=PxeDev1EnDis - PxeDev4EnDis setting=Enabled | Disabled
attribute=PxeDev1Interface -
PxeDev4Interface
setting=Enabled | Disabled
attribute=PxeDev1Protocol -
PxeDev4Protocol
setting=IPv4 | IPv6
attribute=PxeDev1VlanEnDis -
PxeDev4VlanEnDis
setting=Enabled | Disabled
attribute=PxeDev1VlanId - PxeDev4VlanId setting=<integer>
attribute=PxeDev1VlanPriority -
PxeDev4VlanPriority
NOTE: Conguration of virtual LAN
(VLAN) interfaces are not displayed
on Server Administrator Network
Settings.
setting=<integer>
One-Time Boot
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
attribute=OneTimeBootMode setting=Disabled | OneTimeBootSeq |
OneTimeHddSeq | OneTimeUeBootSeq |
OneTimeCustomBootSeqStr |
OneTimeCustomHddSeqStr |
OneTimeCustomUeBootSeqStr
attribute=OneTimeBootSeqDev sequence=aliasname1, aliasname2,.....
aliasnameN
attribute=OneTimeHddSeqDev sequence=aliasname1, aliasname2,.....
aliasnameN
attribute=OneTimeUeBootSeqDev sequence=aliasname1, aliasname2,.....
aliasnameN
Processor Settings attribute=ControlledTurbo setting=Enabled | Disabled | Custom
attribute=DataReuse setting=Enabled | Disabled
attribute=DcuIpPrefetcher setting=Enabled | Disabled
attribute=DcuStreamerPrefetcher setting=Enabled | Disabled
attribute=LogicalProc setting=Enabled | Disabled
attribute=Proc1Brand setting=<string>
attribute=Proc1Id setting=<string>
attribute=Proc1L2Cache setting=<string>
attribute=Proc1L3Cache setting=<string>
attribute=Proc1NumCores setting=<integer>
attribute=Proc2Brand setting=<string>
attribute=Proc2Id setting=<string>
attribute=Proc2L2Cache setting=<string>
Omcong Managing Components Using The Instrumentation Service 71