Users Guide

Using Unified Server Configurator to Install an Operating System 65

Insert the OS installation media and click

The USC verifies that the installation media is appropriate for the

operating system you selected. If the inserted installation media does not

match the operating system selection, it will be ejected.

Click

Finish

to reboot the system and continue with the OS installation.

Upon reboot, the system boots to the OS installation media.

NOTE: In the event that the OS install is interrupted and the system reboots before

the install completes, you need to specify that the system boot to the install media.

Watch the prompts during the reboot and select Yes when asked whether the

system should boot to the install media.

NOTE: You can cancel the OS install by pressing the F10 key. Be aware that

pressing the <F10> key at any point during the install process or while rebooting

causes any drivers provided by the OS Deployment wizard to be removed.

For more information on setting up the USC, updating the platform, RAID

configuration, deploying the operating system, running diagnostics, and

performing administrative tasks, see Dell Unified Server Configurator User’s

Guide.