Reference Guide

VDR95
Message Unable to log block
arg1 .Bad block table on arg2 is full.
Arguments
–
arg1 =
arg
–
arg2 =
VD Name
Detailed Description This alert message occurs if the virtual disk has bad blocks.
Recommended Response Action Replace the disk in the Virtual disk, generating this alert and restore from backup.
You may have lost data.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 3 (Informational)
Trap/EventID 4355
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
VDR96
Message Bad block table on
arg1 is 80 percent full.
Arguments
–
arg1 =
virtual disk
Detailed Description This message occurs if the virtual disk has bad blocks.
Recommended Response Action Replace the disk in the Virtual disk, generating this message.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 3 (Informational)
Trap/EventID 4355
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
1005