Reference Guide

LCD Message Processor module <name> voltage is outside of range. Contact support
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
VLT0102
Message Processor module
arg1 voltage is greater than the upper warning threshold.
Arguments
–
arg1 =
name
Detailed Description System hardware detected an over voltage or under voltage condition. If multiple
voltage exceptions occur consecutively the system may power down in failsafe mode.
Recommended Response
Action
1) Review system logs for power supply exceptions. 2) Remove the processor module.
Inspect processor socket for bent pins. 3) If the problem persists, contact technical
support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
VLT0103
Message Processor module
arg1 voltage is greater than the upper critical threshold.
Arguments
–
arg1 =
name
Detailed Description System hardware detected an over voltage or under voltage condition. If multiple
voltage exceptions occur consecutively the system may power down in failsafe mode.
Recommended Response
Action
1) Review system logs for power supply exceptions. 2) Remove the processor module.
Inspect processor socket for bent pins. 3) If the problem persists, contact technical
support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 1 (Critical)
LCD Message Processor module <name> voltage is outside of range . Contact support
1020