Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.0

121

122

123

124

125

126

127

128

129

130

BAR111

Message Server Profile operation timed out.

Detailed Description The Import or Export job has failed. The Import or Export operation timed-out while

validating or transferring Server Profile data. Possible causes are loss of network

connectivity, vFlash SD card access failure, or problems encountered with system power

off and on.

Recommended

Response Action

If the managed system does not turn off during Import, turn off the system and retry the

operation. If the managed system turned off, restart the Remote Access Controller and retry

the operation. If the export was to a network share verify the connection and try the

operation again. If the export destination was the vFlash media, insert a new SD card and

try the operation again.

Category Configuration

SubCategory BAR = Backup/Restore

Severity Severity 1 (Critical)

LCD Message No LCD message display defined.

Initial Default. LC Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE

BAR112

Message The system identifier in the Server Profile file does not match the target system.

Detailed Description Server Profile backup file validation failed because the target system identifier

information does not match the value stored in the file. The Server Profile file may be from

another system or the iDRAC may need to be restarted to acquire the system identifier

information accurately.

Recommended Response

Action

Obtain a valid Server Profile file for the target system and try the operation again. If the

problem reoccurs, restart the iDRAC and try the operation again.