Reference Guide

BAT1009
Message Write policy on
arg1 was changed to Write Back.
Arguments
–
arg1 =
controller name
Detailed Description The controller battery health has returned to normal.
Recommended Response Action No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
Trap/EventID 4275
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
BAT1010
Message Battery on
arg1 requires reconditioning. Initiate a learn cycle.
Arguments
–
arg1 =
Controller name
Detailed Description Battery is in warn only mode and requires reconditioning.
Recommended Response Action Start a learn cycle on the battery.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BAT1011
Message Battery on
arg1 is in warn only mode and requires reconditioning.
141