Reference Guide

Arguments
–
arg1 =
Controller name
Detailed Description This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BAT1012
Message The
arg1 battery temperature is above normal.
Arguments
–
arg1 =
Controller name
Detailed Description Diagnostic event for service to determine if there is an ambient temperature
problem.
Recommended Response Action No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BAT1013
Message Recharge count has exceeded the maximum limit for battery on
arg1 .
Arguments
–
arg1 =
Controller name
Detailed Description The battery cannot be recharged further.
Recommended Response Action Replace the battery pack.
142