Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
BAT1033
Message The battery on
arg1 was removed.
Arguments
–
arg1 =
controller name
Detailed Description The controller cannot communicate with the battery. Either the battery was removed, or
the contact point between the controller and the battery is degraded.
Recommended Response
Action
Make sure that the battery is present and properly connected. If the battery is present,
wait for a few minutes and re-check if the battery is detected. If the contact point
between the battery and the controller is degraded, you must replace the battery, the
controller, or both. Refer to the storage hardware documentation for information on how
to safely access, or remove. Contact technical support if the issue persists.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 2 (Warning)
Trap/EventID 4274
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
BAT1034
Message The battery properties for
arg1 have changed.
Arguments
–
arg1 =
controller name
Detailed Description One or more battery properties were modified.
Recommended Response Action No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
Trap/EventID 4275
LCD Message No LCD message display defined.
152