Reference Guide

BIOS003
Message Missing required parameter. Refer to the inserted comment.
Detailed Description An invalid number of arguments was passed to the method.
Recommended Response Action Enter all the required command parameters. Check documentation and try again. \n
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS004
Message Invalid parameter value for
arg1
Arguments
–
arg1 =
attribute name
Detailed Description The value for the specified parameter is invalid.
Recommended Response Action Verify that parameter values passed to the method are entered as they appear in the
enumeration and parameter data type matches the documentation. \n
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS005
Message Mismatch in AttributeName and AttributeValue count
Detailed Description The number of AttributeName and AttributeValue parameters do not match.
Recommended Response Action Enter the same number of parameters for AttributeName and AttributeValue. Refer
to documentation for method input parameter details.
156