Reference Guide

BIOS014
Message Invalid AttributeValue for AttributeName:
arg1
Arguments
–
arg1 =
attribute name
Detailed Description AttributeValue may be invalid because of the following causes: \n1. Length of new
AttributeValue is not within minLength and maxLength \n2. Value of new
AttributeValue is not within LowerBound and UpperBound \n3. Value of new
Attributevalue is not one of the possible values
Recommended Response
Action
Refer to the documentation on valid Attribute values
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS015
Message AttributeValue cannot be changed to read only AttributeName
arg1 .
Arguments
–
arg1 =
attribute name
Detailed Description A set attribute operation was attempted on a read only attribute.
Recommended Response Action No response action is required.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
161