Reference Guide

BIOS016
Message AttributeValue cannot be changed for disabled AttributeName
arg1 .
Arguments
–
arg1 =
attribute name
Detailed Description A set attribute operation was attempted on a disabled attribute.
Recommended Response Action No response action is required.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS017
Message Unable to delete vFlash pending one-time boot configuration
Detailed Description Unable to delete vFlash pending one-time boot configuration
Recommended Response Action Remove AC power from system and after restoring AC power, retry the operation.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS018
Message Invalid BIOS Password
Detailed Description The BIOS password specifed in the operation is not valid. A valid BIOS password must
be made from the following: 0 to 32 characters in length, numbers 0 to 9, lowercase
letters a to z, special characters 0x20 (<space>), 0x22 (), 0x2B (+), 0x2C (,), 0x2D (-), 0x2E
(.), 0x2F (/), 0x3B (;), 0x5B ([), 0x5C (\), 0x5D (]), 0x60 ().
162