Reference Guide

Recommended Response
Action
Retry the operation with a BIOS password that conforms with system BIOS password
requirements.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS021
Message Cannot authenticate BIOS password.
Detailed Description The old BIOS password specified in the change BIOS password operation was
incorrect.
Recommended Response Action Retry the operation with correct old BIOS password.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS022
Message Cannot set the BIOS password. Password is disabled due to a jumper setting on the
motherboard.
Detailed Description The BIOS password is disabled in the hardware using a jumper and can not be set.
See the system owners manual for jumper location.
Recommended Response
Action
Change the jumper setting on the system board to enable changing the BIOS
password.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
163