Reference Guide

LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS023
Message Cannot perform the operation due to an unknown error in iDRAC.
Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC.
An iDRAC reset or power cycle is recommended.
Recommended Response Action Retry the operation. If the problem continues, reset the iDRAC.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BIOS024
Message Set operation failed as the attribute is read-only.
Detailed Description The attribute used in the operation is read-only and its value cannot be modified. Some
attributes can change from read-only to read-write and back based on the value of other
attributes. These dependencies are described in documentation and as meta-data when
the atttribute is enumerated.
Recommended Response
Action
Refer to the documentation on the attribute. Resolve any dependencies or pre-requisites
and retry the operation.
Category Configuration
SubCategory BIOS = BIOS Management
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
164