Reference Guide

BOOT010
Message Could not locate vFlash partition index
Detailed Description The provided vFlash partition index could not be found on the system.
Recommended Response Action Verify that a vFlash partition with the desired index exists on the System.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BOOT011
Message Failed to set vFlash partition for one time boot
Detailed Description The provided vFlash partition could not be set for one time boot.
Recommended Response Action Power cycle system and reapply firmware packages for Lifecycle Controller and
iDRAC.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BOOT012
Message Job started to attach and set vFlash SD card partition for OneTime boot.
Detailed Description A job was created to configure a OneTime boot to the specified vFlash SD card
partition. If this partition was not attached to the system, the job attaches it as well.
Recommended Response Action No response action is required.
Category Configuration
171