Reference Guide

BOOT015
Message Set operation successful for the boot partition.
Detailed Description The boot partition configuration request was successful. An unattached vFlash partition
was configured for one-time boot using the ChangeBootOrderByInstanceID method.
The method creates a job (to attach the vFlash partition and set the partition for one-
time boot.
Recommended Response
Action
No response action is required.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BOOT016
Message Input source argument value for the boot device is incorrect or not found among the
boot devices on the system.
Detailed Description The input source argument value referring to the boot device is incorrect or empty. The
boot device identifier must match the InstanceID for the BootSourceSetting instance
that represents the boot device.
Recommended Response
Action
Retry the operation with valid source argument for the boot device.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
173