Reference Guide

BOOT017

Message Source argument does not support enable or disable mode

Detailed Description The boot device(s) specified in the source argument used in the operation cannot be

enabled or disabled. This behavior applies to BCV devices and one-time boot.

Recommended Response Action Refer to the documentation on validity of operation for the boot device specified.

Category Configuration

SubCategory BOOT = BOOT Control

Severity Severity 2 (Warning)

LCD Message No LCD message display defined.

Initial Default. None

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

BOOT018

Message Specified Boot Control List is Read-Only

Detailed Description The Boot Control List specified in the operation is read-only and cannot be modified.

Recommended Response Action Refer to the documentation on validity of operation for the Boot Control List

specified.